648018
23
Zoom out
Zoom in
Previous page
1/148
Next page
2
6
1
3
45
24
ENGLISH
Instructions for Use
4.3 RIDE+ EASY Controller
1• Battery level 2• Light indicator, On or Off 3• Side button (On/Off, Light On/Off) 4• Front + (right
hand) button 5• Front - (left hand) button 6• Level indicator
Switching system On / Off
To switch the system on, push the Side button once. The battery- pack will
emit four short ‘beeps’ and the system will do a self-check. This is shown
on the display as a building up of the display: the bicycle outline shows
first, then the state of charge of the battery is shown. To switch the system
off, press the Side button again. The battery-pack will emit five short
beeps’. There is no difference between riding with the system ‘on’ in level
0’ or ‘off’. If the bike is left with the system on, it will automatically switch off after about 10 minutes.
• Assistance/(Regeneration) Level
There are four levels of assistance. The bars behind the bicycle wheel in
the display show in which assist-level the system is. For pedaling
assistance, press the ‘+ (right hand)’ button. For assistance level 1,
press once. Press again for more assistance. Push the ‘-(left hand)
button to go to a lower level. When bars behind the bicycle wheel in the
display are all outlined only, you are pedaling a normal bicycle. When
the rear brake is pulled, the system switches to generating. The two
upper bars in the display will blink.
Regeneration levels are not installed as standard on the controller. This means that the motor will only
generate energy when the rear brake is pulled. However, if you want to, your dealer can activate the
regeneration levels. Regeneration levels can be controlled in a similar way if no level is activated on
the controller. Push ‘-’ button once for regeneration level 1, again for higher levels. Push ‘+’ button to
go to a lower level.
Notice: It is strongly advised to ride away in a straight line when an assistance level is selected.
Never select assistance level 3 or 4 during maneuvering or riding away in a tight corner. The powerful
reaction of motor might take you unawares.
• Switching lights On / Off
For bikes equipped with lights: keep the ‘Side’ button pressed for five
seconds to switch lights on or off. This switches on the front light, the
rear light and the backlight in controller screen. In the display, the
light symbol will appear. The lights will stay on even when you stop.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek RIDE plus C420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek RIDE plus C420 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trek RIDE plus C420

Trek RIDE plus C420 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info