775419

Trek Incite 9i - 2005 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
6
INCITE 9I AND 11I
Setting the 9i and 11i is done by pushing the three buttons in a specific sequence. The button on the
side of the computer is the
Set
button. The two buttons on the bottom are the left and right
Mode
buttons. If the
Mode
button is called out in the directions without specifying which one, you may
push either one and the computer will accordingly scroll in a different direction.
To set Units (distance and temperature)
This setting tells the computer which conversion to use: metric or SAE (“English”)
1. Cycle
Mode
to Max.
2. Hold
Set
.
3. Cycle
Mode
to your preferred setting (MPH for miles or KPH for kilometers).
4. Push
Set
to select.
The computer displays the temperature icons.
5. Cycle
Mode
to your preferred setting (F for Fahrenheit, C for Celsius).
6. Push
Set
to select.
The computer returns to the current speed display.
To set Odometer
By default, the odometer always starts at ‘0’. If desired, the odometer can be manually set at another value.
1. Cycle
Mode
to ODO.
2. Hold
Set
.
The computer displays the bottom row of digits with the first digit flashing.
3. Cycle
Mode
to your preferred value.
4. Press
Set
to select.
The next digit flashes.
5. Repeat steps 3 and 4 until all digits have been selected.
After the last digit is selected, the computer returns to the current speed display.
To set Clock
The clock can be set to 12 hours or 24 hours. When setting your hours value, choose accordingly. You
will set the 12 or 24 hour selection after setting the values.
1. Cycle
Mode
to CLK.
2. Hold
Set
.
The computer displays the clock, with hours flashing.
3. Cycle
Mode
to your preferred value.
4. Push
Set
to select.
5. Cycle
Mode
to your preferred value for minutes.
6. Push
Set
to select.
7. Cycle
Mode
to your preferred value for hours format (12 or 24).
8. Push
Set
to select.
After the hours format is selected, the computer returns to the current speed display.
Wheel sizes
The 9i and 11i allow you to program the computer to calculate using two different wheel sizes. The
second wheel size allows the computer to calculate using the wheel size of a second bike. For example,
you can use the computer on your road bike with 700c racing wheels, then move it to your mountain
bike with 26” wheels. In both cases, the trip distance and speed will be accurate. The computer adds
the data for the two wheel sizes resulting in the total distance (ODO). In performing these steps, note
that the wheel icon in the upper left corner has two values: Wheel 1 is a circle (Figure 13) and Wheel
2 is a circle with a semi-circle surrounding it.
To set the wheel size
1. Cycle
Mode
to TME.
2. Hold
Set
.
The wheel selection icon appears in the upper left corner.
3. Cycle
Set
to your preferred wheel.
4. Cycle
Mode
to your preferred wheel size.
For a custom wheel size, see To set a custom wheel size
5. Hold
Set
to select.
The computer returns to the current speed display.
To set the second wheel size, repeat the instructions, but choose the other wheel icon before setting
values.
Setting the computer
Figure 13- Wheel selec-
tion icons
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek Incite 9i - 2005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek Incite 9i - 2005 in the language / languages: English as an attachment in your email.

The manual is 0.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info