Manual Trek eBike Systems 2024 - Bosch (page 356 of 376) (English, German, Dutch, French)

817491

356

Zoom out

Zoom in

1/376

English – 2

Technical data

Charger Standard Charger

(36–4/230) Compact Charger

(36–2/100-230) Fast Charger

(36–6/230)

Product code BCS220 BCS230 BCS250

Rated voltage V~ 207to264 90to264 207to264

Frequency Hz 47to63 47to63 47to63

Battery charging voltage V= 36 36 36

Charging current (max.) A 4 2 6A)

Charging time

– PowerPack 300, approx. hrs 2.5 5 2

– PowerPack 400, approx. hrs 3.5 6.5 2.5

– PowerPack 500, approx. hrs 4.5 7.5 3

Operating temperature °C 0to+40 0to+40 0to+40

Storage temperature °C +10to+40 +10to+40 +10to+40

Weight, approx. kg 0.8 0.6 1.0

Protection rating IP40 IP40 IP40

A) The charging current is limited to 4A for the PowerPack 300 and for Classic+ Line batteries.

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Operation

Start-up

Connecting the charger to the mains (see figure A)

uPay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the charger. Chargers marked 230 V can

also be operated at 220 V.

Plug the device connector (3) of the power cable into the

device socket (2) on the charger.

Connect the power cable (country-specific) to the mains.

Charging the Removed eBike Battery (see figureB)

Switch the eBike battery off and remove it from its holder on

the eBike. When doing so, read and observe the operating

instructions of the eBike battery.

uEnsure the eBike battery is placed on clean surfaces

only. Avoid getting dirt, e.g. sand or soil, in the charging

socket and contacts in particular.

Plug the charging connector(5) of the charger into the char-

ging socket(6) on the eBike battery.

Charging the eBike battery on the eBike (see figuresC

andD)

Switch the eBike battery off. Clean the cover of the charging

socket(7). Avoid getting dirt, e.g. sand or soil, in the char-

ging socket and contacts in particular. Lift the cover of the

charging socket(7) and plug the charging connector(5) into

the charging socket(6).

uThere is a risk of fire due to the charger heating up

during charging. Ensure the eBike battery on the

eBike is completely dry and placed on a fireproof sur-

face before charging. If this is not possible, remove the

eBike battery from the holder and charge it in a more suit-

able location. When doing so, read and observe the oper-

ating instructions of the eBike battery.

Charging Process for Two eBike Batteries

If two eBike batteries are fitted to an eBike, both eBike bat-

teries can be charged using the uncovered connection. To

begin with, both eBike batteries are charged one after the

other until they reach approx.80–90% capacity, then they

are both fully charged at the same time (the LEDs flash on

both eBike batteries).

When the eBike is in operation, power is drawn from both

eBike batteries on an alternating basis.

If you take the eBike batteries out of the holders, you can

charge each one individually.

Charging process

The charging process begins as soon as the charger is con-

nected to the eBike battery or charging socket on the eBike

and to the mains.

Note: The charging process is only possible when the tem-

perature of the eBike battery is within the permitted char-

ging temperature range.

Note: The drive unit is deactivated during the charging pro-

cess.

The eBike battery can be charged with and without the on-

board computer. When charging without the on-board com-

puter, the charging procedure can be observed on the eBike

battery charge indicator.

When the on-board computer is connected, a charging noti-

fication appears on the display.

0 275 007 XCX | (22.02.2023) Bosch eBike Systems

356

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trek eBike Systems 2024 - Bosch in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 20.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trek eBike Systems 2024 - Bosch Manual

Product: