817492
64
Zoom out
Zoom in
Previous page
1/376
Next page
English – 4
Displays and configurations of the
on-board computer
Charge indicator of the eBike battery
The battery charge indicator(g) displays the eBike battery's
state of charge. The eBike battery's state of charge is also in-
dicated by the LEDs on the eBike battery itself.
In the indicator(g), each bar in the battery symbol repres-
ents approximately 20% capacity:
The eBike battery is fully charged.
The eBike battery should be recharged.
The LEDs of the battery charge indicator on the
eBike battery go out. The capacity for assisting the
drive has been used up, and assistance is gently
switched off. The remaining capacity is made
available for the lighting. The indicator flashes.
The capacity of the eBike battery is enough for
about two hours of lighting.
If an eBike is powered by two eBike batteries, the eBike bat-
tery charge indicator(g) displays the state of charge of both
eBike batteries.
Speed and distance indicators
The speedometer(a) always displays the current speed.
The display(i) always shows the last setting as standard. Re-
peated medium-length presses of the button will display
the trip distanceTRIP, the total distanceTOTAL and the
range of the eBike batteryRANGE one after the other.
(Briefly pressing the button will decrease the assistance
level.)
To reset the trip distanceTRIP, select the trip distanceTRIP
and simultaneously press and hold the buttons+ and.
The display will initially showRESET. If you continue to press
both buttons, the trip distanceTRIP will be set to 0.
To reset the range of the batteryRANGE, select the battery
rangeRANGE and simultaneously press and hold the but-
tons+ and. The display will initially showRESET. If you
continue to press both buttons, the rangeRANGE will be re-
set to the value in the factory settings.
You can switch the displayed values from kilometres to miles
by holding down the button and briefly pressing the
on/off button(1).
The versions of the subsystems and their model part num-
bers can be displayed for the purposes of servicing,
provided the subsystems divulge this information (depend-
ent on the subsystem). With the system switched off, simul-
taneously press the buttons and+ and then press the on/
off button(1).
The USB port is reserved for connecting diagnostic systems.
The USB port does not have any other function.
uThe USB connection must always be completely
sealed with the protective cap (8).
Action Buttons Duration
Switch on on-board computer
Switch off on-board computer
Increase assistance +
Decrease assistance
Display TRIP, TOTAL, RANGE,
assistance modes
Switch on bike lights +
Switch off bike lights +
Reset trip distance +
Activate push assistance
Implement push assistance WALK
+
1.
2. Any
Switch from kilometres to miles 1. Keep
pressed
2.
Display the versions A)B) + 1. Keep
pressed
2.
Adjust display brightnessA) +
or +
1. Keep
pressed
2.
A) The eBike must be switched off.
B) The information is shown as scrolling text.
1 270 020 XBP | (22.02.2023) Bosch eBike Systems
64
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek eBike Systems 2023 - Bosch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek eBike Systems 2023 - Bosch in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 20.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info