817492

Trek eBike Systems 2023 - Bosch Manual

25
Zoom out
Zoom in
Previous page
1/376
Next page
English – 5
To change the basic settings, press the on/off button(5)
next to the – indicator to reduce or scroll down, or the light-
ing button(2) next to the + indicator to increase or scroll up.
If the on-board computer is inserted in the holder(4), it is
also possible to change the settings with the – (11) and +
(12) buttons on the operating unit.
To exit the function and save a changed setting, press the
RESET button(6) for three seconds.
You can choose between the following basic settings:
–<– Clock +>: Setting the current time. The time can be
changed faster by pressing the setting buttons for a
longer period.
–<– Wheel circum. +>: Changing the value pre-set by the
manufacturer by ± 5%. This menu item is displayed only
when the on-board computer is in the holder.
–<– English +>: Changing the language of the text indic-
ator. You can choose between German, English, French,
Spanish, Italian, Portuguese, Swedish, Dutch and Danish.
–<– Unit km/mi +>: Displaying the speed and distance in
either kilometres or miles.
–<– Time format +>: Displaying the time in 12-hour or
24-hour format.
–<– Shift recom. on +>/<– Shift recom. off +>: Switch-
ing the shift recommendation display on or off.
–<Power-on hours>: Total time travelled with the eBike
(cannot be changed)
–<Displ. vx.x.x.x>: Display software version.
–<DU vx.x.x.x>: Drive unit software version. This menu
item is displayed only when the on-board computer is in
the holder.
–<DU SN xxxxxxx/xxx>: Drive unit serial number. This
menu item is displayed only when the on-board computer
is in the holder.
–<DU PN xxxxxxxxxx>: Drive unit part number. This menu
item is displayed only when the on-board computer is in
the holder and the drive unit provides a part number.
–<Service MM/YYYY>: This menu item is displayed if the
bicycle manufacturer has set a fixed service date.
–<Serv. xx km/mi>: This menu item is displayed if the bi-
cycle manufacturer has set a service date after travelling a
certain distance.
–<Bat. vx.x.x.x>: eBike battery software version. This
menu item is displayed only when the on-board computer
is in the holder. When using two eBike batteries, the soft-
ware versions of both eBike batteries are displayed suc-
cessively.
–<Bat. PN xxxxxxxxxx>: eBike battery part number. This
menu item is displayed only when the on-board computer
is in the holder and the eBike battery provides a part num-
ber. When using two eBike batteries, the software ver-
sions of both eBike batteries are displayed successively.
–<Cha. vx.x.x.x>: Software version of the charger used to
charge the eBike battery. This is displayed only if the
charger provides the software version.
– If the eBike is equipped with ABS, the software version,
serial number and part number of the ABS are also dis-
played.
Error code indication
The eBike's components are continuously and automatically
monitored. If an error is detected, the corresponding error
code will appear on the text indicator(d).
Press any button on the on-board computer(3) or on the op-
erating unit(9) to return to the standard indication.
The drive may be automatically shut down, depending on the
type of error. However, if you wish to continue cycling, you
will always be able to do so without assistance from the
drive. Before undertaking any other journeys, the eBike
should be checked.
uHave all repairs performed only by an authorised bike
dealer.
Code Cause Corrective measures
410 One or more buttons of the on-board com-
puter are disabled. Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.
414 Operating unit connection problem Have the connections checked
418 One or more buttons on the operating unit
are disabled. Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.
419 Configuration error Restart the system. If the problem persists, contact your Bosch
eBike dealer.
422 Drive unit connection problem Have the connections checked
423 eBike battery connection problem Have the connections checked
424 Communication problem between com-
ponents Have the connections checked
426 Internal time-out error Restart the system. If the problem persists, contact your Bosch
eBike dealer. With this error, it is not possible to bring up the wheel
circumference in the basic settings menu or to adjust it.
430 Internal battery of the on-board computer
is flat (does not apply to BUI350) Charge the on-board computer (in the holder or via the USB port)
Bosch eBike Systems 1 270 020 XBI | (14.02.2023)
25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek eBike Systems 2023 - Bosch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek eBike Systems 2023 - Bosch in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 20.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info