618789
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
To sharpen the tip, lift up on the knife handle slightly as the curved portion of the blade is drawn
through the blade guides. When drawing the knife through the blade guides, allow approximately
one second for each two inches of blade. For example, if sharpening a knife with a 6 inch blade, you
should take approximately three seconds for each pass.
STAGE 2 Fine Polishing
Completes the knife sharpening process by honing and polishing the knife to an exact razor sharp
edge. Slowly draw the knife through both blade guide slots in stage 2 (Fig1) three times, alternating
passes between the two slots. Each pass should take approximately three or more seconds, again
depending on the knife blade’s length. Complete the polishing process with one quick pass
(approximately one second) through both slots of stage 2. Before using the knife to slice food, always
wipe the knife blade with a damp cloth after polishing. If the knife does not slice food with ease,
repeat stages 1 & 2.
(Fig. 1)
3. Cleaning
Wipe clean only the exterior of the sharpener with a non- abrasive cleaner. Never clean the knife
sharpener in water or any other liquid fluencies. Do not use any type of lubrication in order to clean
the sharpener.
Your knife sharpener is equipped with two special receptacles on the bottom of the unit.
These receptacles can be used for collecting metal filings from your knives. This needs to be emptied
on a regular basis by removing the red plastic plugs on the bottom of the unit. By holding the device
upside down you are able to shake out the metal filings that have collected inside. This should be
done about once a year under normal usage. Do not attempt any maintenance or alteration to this
item yourself. This should always be done only by a trained professional.
4. Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials. However, they
also contain damaging substances, which were necessary for their functionality and safety. If
these were put in the non-recyclable waste or were handled incorrectly, they could be
detrimental to human health and the environment. Therefore, do not put your old device into the
non-recyclable waste under any circumstances.
PLEASE NOTE
Utilize the collection point, established in your town, to return and recycle old electric and
electronic devices. If necessary, contact your town hall, local refuse collection service or your
dealer for information.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trebs Comfortslice Model 99319 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trebs Comfortslice Model 99319 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info