618957

Trebs Comfortice model 99218 Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
17
5. Ice making cycle begins. The evaporator in the water tray starts to form ice onto the
evaporator fingers.
6. It takes about 6 to 18 minutes (depending on the water temperature) for the ice making
cycle to complete. Once completed, the water tray will tilt forward; the remaining water
will flow back to the water reservoir and the ice cubes will drop from the fingers. You will
hear a sound as the ices cubes are released. Ice are dropped to the ice basket directly.
7. In about 30 seconds, the water tray will tilt backward. Once the water tray returns to its
leveled position, the second ice making cycle begins.
8. Press “OFF” to stop the machine.
9. If is on, if still want to make ice, then add water to the water tank , same as step
2.
Noted: please take out the ice first, then add one full cup of water, so as to avoid
overflow of water when the ice melt.
10. Also you can set the clock, automatically turn on and turn off time via following steps:
Set clock: press button “TIME” once, and press “SET” to change the hour, press
button “TIME” twice, and press “SET” to change minute, after setting the right time,
the clock is set successfully.
Turn On: press button “TIME” three times, to set hour, press four times to set
minutes, waiting for 5 seconds, the “ON” indicator will turn off, then press “SET”
twice, the “TIME” and “ON” indicator in front of the time is on, this setting is
finished.
11. Turn off: press button “TIME” three times ,to set hour, press four times to set minutes,
waiting for 5 seconds, the “OFF” indicator will turn off, then press “SET” three times, the
“TIME”, “ON” and “OFF” indicator in front of the time is on, this setting is finished.
12. When is on, please pull the drawer out, and take out the ice with the ice collecting
tray.
Notice: For best performance, water temperature should be between 7°C and 35°C and
ambient between 15°C and 38°C.
Care and Cleaning / Maintenance
To ensure the cleanliness of the ice cubes, water in the water reservoir should be
replaced every 24 hours.
Remove the drain plug to drain remaining water from the water reservoir when the ice
maker will not be used for long period of time.
Notice: Screw the drain plug back in place after the water has been drained. If the cap is
lost, please call the distributor.
Always change with fresh water before starting ice production at initial installation or
after long shut-off periods.
Please clean your ice maker regularly. When cleaning, unplug the unit and remove the
ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside
surface of the ice maker. Do not spray ice maker with chemicals or diluted agents such as
acids, gasoline or oil. Rinse thoroughly before starting.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trebs Comfortice model 99218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trebs Comfortice model 99218 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info