Manual Trebs Comfortcam CC-105 (page 25 of 32) (English, Dutch)

466349

Zoom out

Zoom in

1/32

CAMERA INSTALLATION

1.Loosen the license plate bolts/screws,

then remove the rear license plate.

2.Insert each license plate bolt into a

supplied wedge, then through the bolt

holes of the camera, then through the

remaining wedges and the license plate.

(Fig.1)

3.Align with holes on vehicle and

temporarily tighten the license plate

bolts/screws. The wedges will angle the

camera down.

4.You will need to choose a route for the camera's power cable through

the vehicle's body to the reverse light circuit.(Fig. 2)

Fig. 1

Fig. 2

Fig. 3

Fig. 4

5.Some vehicle's may have a hole available

to pass the wire through, (Fig. 3) such as

where the license plate light is mounted,

or you can drill a hole close to where the

power cable is attached to the camera.

(Fig. 4) Once you have chosen where the

cable will enter the vehicle's body, remove

the camera. If you able to use an existing

opening, skip the next two steps.

6.If you are going to drill a hole, choose a

location as close to the camera where

the power cable comes out of it. BEFORE

YOU DRILL A HOLE YOU MUST CHECK

Using an Existing

Opening for Access

Drilling an Access Hole

-7-

When mounting the camera you must make sure that it's field of view

is not obstructed. To adjust the angle of the camera, use the supplied

wedge shaped shims. We recommend to attached the camera under the

license plate. The camera can be attached by screwing or sticking.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trebs Comfortcam CC-105 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trebs Comfortcam CC-105

Trebs Comfortcam CC-105 User Manual - German, French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trebs Comfortcam CC-105 Manual

Product: