25
Operation
Place the pizza oven on a stable and flat surface. Ensure the surface is heat and splash resistant.
Ventilate the room during the use of the pizza oven.
Insert the plug into the wall outlet. The red indicator lights up. Let the pizza oven pre-heat for 10
minutes.
Slide the pizza on the spatula in the pizza oven. Leave the pizza on the spatula, allowing you to easily
remove the pizza from the oven again.
Bake the pizza 5 to 7 minutes. Place the pizza on your plate. Please note that the spatula is very hot;
place it on a heat-resistant surface.
You can also keep the pizzas warm on the top of the specially designed ceramic dome.
NOTE: this dome is always warm to use. So don't just lift it, let it cool down.
After use, pull out the plug to switch off the appliance. The red indicator light goes out.
The chassis is equipped with an automatic thermostat. In case of overheating, the appliance will
automatically switch off.
Cleaning and Maintenance
Ensure that the power is switched off immediately and leave at least 30 minutes to cool down before
cleaning and storing.
The ceramic lid must have completely cooled down before getting into contact with water. Do not place
the warm lid on a cold surface, because this can damage it by cooling too quickly.
There is no need to clean the ceramic lid after normal use. The ceramic lid is not dishwasher-safe. The
other accessories, such as the baking tray, the spatulas and the dough form are dishwasher-safe.
Clean the exterior of the device with a damp cloth and a mild detergent. Do not use hard brushes,
abrasives, scourers or liquids such as alcohol, petrol or acetone. Dry well after cleaning with a dry cloth.
Under no circumstances immerse the device in water.
Store the device in its original packaging in a dry, cool place. Do not store if it is not completely dry.
Grease the baking sheet slightly if the pizza oven is not used for an extended period of time.
Disposal of the old device
Old electric and electronic devices frequently still contain valuable materials. However, they also
contain damaging substances, which were necessary for their functionality and safety. If these
were put in the non-recyclable waste or were handled incorrectly,
they could be detrimental to human health and the environment. Therefore, do not put your old device
into the non-recyclable waste under any circumstances.
PLEASE NOTE
• Utilize the collection point, established in your town, to return and recycle old electric and electronic
devices. If necessary, contact your town hall, local refuse collection service or your dealer for
information.
• Ensure that your old device is stored safely away from children until it is taken away.
Technical Specifications
