732478
8
Zoom out
Zoom in
Previous page
1/18
Next page
FAN STRUCTURE
8
INSTALLATION
1. Protecve front cover
2. Protecve covers xing screw locaon
3. Fan blades
4. Fan blade xing screw
5. Protecve rear cover xing screws
6. Protecve rear cover
7. Carry handle
8. Motor sha
9. Speed seng dial
10. Oscillaon buon
11. Motor housing
12. Tube
13. Tube length adjustment buon
14. Pedestal cover
15. Pedestal weight adjuster
16. Washer
17. Locking lever
18. Adjustable lt buon
19. Motor housing xing screw
20. Locaon for motor housing xing
screw
21. Motor housing carry buon
22. Carry bolt
Loosen the locking lever (17) from the tube and remove the washer (16).
Slide the pedestal cover (14), the weight adjuster (15) and the washer over the tube and x the parts onto the
tube with the locking lever (17).
Loosen the tube adjustment buon (13) to extend the tube.
Place the motor housing (11) onto the tube.
Tighten the xing screw of the motor housing (19) against its designated locaon (20).
At the other side, ghten the adjustable lt buon (18) into the pedestal.
Place the carry bolt (22) in the hole under the adjustable lt buon (18).
Fix the carry buon for the motor housing (21) onto the carry bolt (22).
Place the protecve rear cover (6) with the handle (7) upwards over the motor sha (8) and then ghten it to
the motor housing using the 4 screws (5).
Slide the fan blades (3) over the motor sha (8) and x them to the motor sha using the xing screw (4).
Turn the clips of the protecve front cover (1) outwards and hang the protecve cover over the edge of the
protecve rear cover. Make sure that the opening at the boom of the protecve front cover is aligned with
the opening at the boom of the protecve rear cover (2).
Insert the screw through both openings at the boom of the protecve covers (2) and x the covers together
using the nut.
Finally, close the clips around both protecve covers.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1
2
3
4
5
6
7
15
16
17
19
21
20
18
12
13
14
8
9
10
11
22
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trebs 99385 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trebs 99385 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info