Manual Trebs 99261 Comfortcook (page 35 of 54) (English, German, Dutch, French)

569459

Zoom out

Zoom in

1/54

5.2 Assembly

1. Place the base unit (8) on a flat surface, e.g. a kitchen counter, and make sure it is standing

firmly.

2. Push the collection tray (5) into the base unit and ensure that the handle end faces outwards.

3. Install the chosen attachment into the holder, depending on what you are going to use the

appliance for (see the section about the individual attachments below). Turn the holder so that

the pin on the small handle faces upwards. Place the attachment in the holder so that the small

round hole in the attachment fits over the pin on the left side of the holder.

4. Place the holder with the installed attachment onto the base unit so that the rollers rest in the

inside edge. The end with the small handle should be placed in the furthermost end of the base

unit.

5. Place the lid (6) onto the base unit whilst ensuring that the slit in the lid fits over the pin on the

holder’s small handle. Press the lid until it clicks into place. Using a finger, check whether the

holder can be moved freely back and forth.

6. Install the motor unit (9) above the lid, so that it fits down over the pin in the slit and the two

pins at the top of the lid.

7. Decide whether to use the large (7), medium (3) or small (2) feed tube, depending on the size of

the vegetables you are going to chop/ slice. Select the corresponding pusher that matches the

size of the feeder opening. See explanation in the table below.

8. The locking ring (4) fixed around the medium-sized feed tube is equipped with a tongue that acts

as an off button. The tongue should be fitted into the recess around the activation pin (10) on

the motor unit before the appliance can be started. The appliance is designed so that this part is

always used, either as a feed tube or as a part of the large pusher.

9. The appliance is now ready for use.

Feed tube

To be used with

Large feed tube (80 mm diameter)

Large pusher (= medium feed tube + small feed

tube + small feeder) (1+2+3)

Medium feed tube (60 mm diameter)

Medium pusher (= small feed tube + small

pusher (1+2)

Small feed tube (40 mm diameter)

Small pusher (1)

PLEASE NOTE

 NEVER put fingers, utensils or similar into the feeding pipe or collection tray whilst the

appliance is in use.

 NEVER use fingers, kitchen utensils or similar to push ingredients down the feed tube. Always

use the pusher.

 NEVER touch the moveable parts whilst the appliance is switched on or connected to the

mains.

5.3 The grater attachment

The grater attachment (12) is intended for grating vegetables and cheese. We recommended using

the appliance with hard chesses, such as parmesan. Soft cheeses are not very well suited for grating.

1. Install the grater attachment into the holder and install the holder onto the appliance.

2. Install the lid and motor unit onto the appliance.

3. Connect the appliance.

4. Select the feed tube that corresponds to the size of the foods to be grated.

5. Cut the cheese or vegetables into long sticks, and place the sticks in the feed tube.

6. Ensure that the tongue on the locking ring fits down into the recess around the activation

pin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trebs 99261 Comfortcook in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trebs 99261 Comfortcook Manual

Product: