14
DO NOT USE OUTDOORS
Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. The ice cream
maker must never be laid on its side or turned upside down. Use the ice cream maker away from heat
sources keep it at a distance of at least 10cm from walls or other objects that could obstruct free air
circulation.
All maintenance other than normal cleaning must be performed by a service center authorized by the
manufacturer.
The ice cream maker must be connected to an efficiently grounded socket with a minimum rating of 5A
.The manufacturer declines all liability for damage caused by the lack of efficient grounding . If in
doubt, contact a qualified electrician.
Materials and articles in contact with food products conform to the Ec Directives 89/109.This ice cream
maker conforms to the provision of the low voltage Directive no.72/23 with subsequent amendment
93/68 and the Directive on Electromagnetic compatibility no.89/336.
The mixer icm23-1JBQ(the dasher motor) just can be fit on the icm23-1(the machine except the mixer)
specified only which can’t be suitable for any others.
This unit is for household use only. When your Ice cream maker is first used, you may experience an
odor and possibly a slight wisp of smoke from your Ice cream maker’s body. This is caused by the
heat caring of the insulation which protects the motor and is normal. After the first few uses, this will no
longer occur.
WORNING:
If you don’t want to make ice cream or before assembling the ice cream maker make sure the ON/OFF
switch of the Dasher motor is in the OFF position and the electric power cord is unplugged.
IMPORTANT: Place the ice cream maker upright on a flat surface for at least 12 hours before using it
for the time, to allow the oil contained in the compressor to set down.
1. The ice cream maker must be placed in upright position for whatever reason. It must never be laid
on its side or turned upside down, and never be moved especially when in use. This is very
important.
2. Before use, thoroughly wash all parts that will come into contact with the ice cream (including the
fixed stainless steel cylinder ,removable cylinder ,dasher and transparent cover).
3. Pour a measure (2tbs) of surgical alcohol into the fixed stainless steel cylinder and place the
removable cylinder inside the fixed stainless steel cylinder .It is essential to perform this operation
in order for the cold be transmitted from the fixed cylinder to the removable cylinder and thus
guarantee the success of the ice cream.
4. Install the dasher, transparent cover ,and the dasher motor. Insert the dasher to dasher motor until
the dasher snap into position, otherwise the Ice cream maker will not give you the proper mixing
action.
5. Removable cylinder should never be used in a conventional oven, microwave oven on top of the
range of on any other heated surface. If the removable cylinder is scratched of chipped,
removable cylinder should not be used to blend any liquids.
USING THE ELECTRONIC TIMER
The electric timer allow you to control the ON/OFF switch of the mixing motor power.
1. The protection will prolong 2~3 minutes when start the chilling motor. After start the chilling motor,
the indicator light on the left will be bright and, the one on the right will be bright when put the plug
in the socket.
2. The button on the left is the mixing power switch. Press the button after stalling the dasher then
press the switch on the mixing assembly, the mixing motor will start working. When the setting
time finish, the buzzer will work, it indicates that the process is finished and the power will be OFF
