474995
17
Zoom out
Zoom in
Previous page
1/44
Next page
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.com/au
17
Recording a Subject onto an Existing Background Image
Pre-Shot helps you get the background you want, even if you need to ask someone else
to record the image for you. Basically, Pre-Shot is a two-step process.
1. You compose the background you want and press the shutter button, which causes
a semi-transparent image of the background to remain on the screen.
2. Ask someone else to record a shot of you against your original background, telling him/
her to compose the image by using the semi-transparent screen image as a guide.
The camera stores the image produced by step 2 only.
The screen must be ligned up exactly to the on screen background in order to
capture the same image.
1. Slide the mode switch to [ ].
a. Press the MENU button.
b. Select [Function] with the f button.
c. Select [Capture Mode] with the c / d button, and press the SET button.
d. Select [Pre-Shot] with the c / d button, and press the SET button.
e. Press the MENU button to exit from the menu screen.
2. Compose the background you want on the screen, and then press the shutter button
to temporarily record it as a reference image.
This operation causes a semi-transparent image of the background to appear on
the screen, but the displayed image is not actually saved in camera memory.
3. Now you can stand in front of the background and ask someone else to take your
picture, using the semi-transparent background on the screen as a composition
guide.
4. After composing the final image (using the semi-transparent background as a
guide), the person with the camera should press the shutter button to record.
Note that the semi-transparent background image temporarily recorded in step 2
is for composition purposes only. The final image contains only what is in front of
the camera when the shutter button is pressed in step 4.
Freeze the background on
the screen.
Only the second image is
recorded.
Record the image, using the
background on the screen
as a guide.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Traveler DC-8400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Traveler DC-8400 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info