10
Using the supplied fi xings, the video camera can be secured to a support,
such as the handlebars of a bicycle, to a crash helmet or other sports
equipment.
Open the bicycle holder by partially releasing the securing nuts and pushing
the bolt to the side. Open the bicycle holder, place it on the support, close
the bracket again and tighten the securing nut again until the stand is fi rmly
secured.
You can now slide the video camera with the fi xing on its base onto the bicy-
cle holder. Slide on the camera until it engages. To remove the camera again,
push on the lever between the camera and the bicycle holder at the back of
the camera and then slide the camera to the front and away from the holder.
Use the enclosed elastic fastening ribbon to
secure the video camera to larger objects,
such as a helmet.
Pull the free end of the ribbon through the
slots on the fi xings underneath the camera.
To close the fastening ribbon, pull the end
through both openings of the plastic loop.
Check that the ribbon is actually fi rmly
secured.
Fastening ribbon
Bicycle holder
Video camera with
Bicycle holder
