68396
41
Zoom out
Zoom in
Previous page
1/44
Next page
41
Troubleshooting
If a problem occurs with your T.sonic 615, please first check the information listed below before
taking your T.sonic 615 for repair. If you are unable to remedy a problem from the following hints,
please consult your dealer, service center, or local Transcend branch office. We also have FAQ
and Support services on our website at
http://www.transcendusa.com.
Software CD does not auto-run in Windows
®
Go to the Device Manager in the Control Panel and enable the Auto-Insert function for the
CD-ROM drive. Alternatively, you can manually run the “
T.sonic.EXE” file on the software CD.
Operating system cannot detect the T.sonic 615
Check the following:
1. Is your T.sonic 615 properly connected to the USB port? If not, unplug it and plug it in
again.
2. Is your T.sonic 615 connected to the Mac keyboard? If yes, unplug it and plug it into an
available USB port on your Mac Desktop.
3. Is the USB port enabled? If not, refer to the user’s manual of your computer (or
motherboard) to enable it.
Cannot Power ON
Check the following:
1. Is the T.sonic 615 connected to your computer? If yes, unplug it.
2. Is the switch enabled? If yes, switch it to the “OFF” position.
3. Is the battery out of power? If yes, please recharge the battery.
Cannot transfer MP3, WMA, WMA-DRM10, or WAV files to the T.sonic 615
Uninstall and re-install the driver. If this doesn’t work, try Resetting the T.sonic.
Buttons aren’t working
Is the Hold switch enabled? If yes, set it to the “OFF” position.
Cannot hear track playback
1. Have you downloaded any music files onto the T.sonic? If no, then you must first do so
from your computer or the Internet. (Only Mpeg I Layer 3 and WMA files compressed at a
rate of 32Kbps–320Kbps are supported.)
2. Are the earphones properly connected to the earphones jack? If not, reconnect them.
3. Is the volume loud enough? If not, increase the volume level until the music can be heard.
Track name does NOT display correctly on the screen
1. The default language of the T.sonic is English. Please set the language option first.
2. ID3 tag information has display priority on the screen of the T.sonic. You can modify the
ID3 tag by using Windows Media Player or Winamp.
3. If the ID3 tag is empty, just the file name will be displayed on the screen.
Cannot enter the RECORD Mode
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Transcend T.sonic 615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Transcend T.sonic 615 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info