485499
39
Zoom out
Zoom in
Previous page
1/41
Next page
38
Troubleshooting
If a problem occurs with your Photo frame please first check the information listed below before sending
your Photo frame in for repair. If you are unable to remedy a problem from the following hints, please consult
your dealer, service center, or local Transcend branch office. We also have FAQ and Support services on
our websites. For any Hardware issues please consult the Photo frame User’s Manual.
I cannot turn my Transcend Photo frame on
You may not be holding down the Power button long enough. Please press and hold the Power button for at
least 2 seconds. If that doesn’t solve the problem, please check to make sure your Photo frame is connected
securely to the DC adapter, and that the adapter is plugged into a wall socket.
My computers operating system cannot detect my Photo frame
Check the following:
1. Is your Photo frame properly connected to the USB port? If not, unplug it and plug it in again. Make sure
the USB port is connected on both ends, as shown in the User’s Manual.
2. Is your Photo frame connected to the Mac keyboard? If yes, unplug it and plug it into an available USB
port on your Mac Desktop.
3. Is the USB port enabled? If not, refer to the user’s manual of your computer (or motherboard) to enable
it.
I was using my Photo frame, now no buttons are responding (hangs/lags/stalls)
Try unplugging the DC adapter from your Photo frame, then reconnecting it to your Photo frame again.
I have connected my Photo frame to the computer, but the Photo frame does not appear
as a new drive in my operating system?
Verify the DC adapter is connected to your Photo frame and that the Photo frame power is turned on. If not,
turn it on and then connect the Photo frame to the computer again. Please make sure your operating
system meets the Transcend Photo frame system requirements described in the Introduction” section.
My Photo frame cannot read photos on my memory card or the built-in memory
1. Make sure the Photo frame supports the memory card type (CF/SD/MMC/MS).
2. Ensure that the memory card is correctly inserted all the way into its appropriate slot.
3. Edited and deformed photos may not display properly on Photo frame. Some digital cameras save
images into non-standard formats - please check your camera’s user manual for specifics.
How can I display video files on my Photo frame?
The Photo frame only displays certain video formats. Please see the Photo frame FAQ on the Transcend
website for instructions how to encode your video files to the Photo frame’s format.
Can I delete files on my USB flash drive or memory card with the Photo frame?
The Photo frame cannot directly delete any files on a USB flash drive or memory card. However, you can
connect the Photo frame to a computer and use the computer to delete files on memory devices that are
plugged-in to the Photo frame.
Why does the time and date reset after unplugging the DC adapter?
If you unplug the Photo frame for a long time, its internal backup battery will eventually drain. Typically, the
Photo frame can keep your time and date for about 2~3 days after unplugging the DC power adapter.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Transcend PF720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Transcend PF720 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info