485498

Transcend PF710 Manual

26
Zoom out
Zoom in
Previous page
1/31
Next page
25
Orientation
You can choose whether you want PF710 to display photos vertically or horizontally with this convenient
function (note: the orientation setting only applies to Photo View, Thumbnail, and Slideshow modes.)
There are two orientation modes that you can put your PF710 in: Landscape mode and Portrait mode. If
you want to view your PF710 photos horizontally, you can set to Landscape mode to change the
orientation of PF710. If you want to stand or hang your PF710 up vertically, you should choose Portrait
mode. In the Photo View mode or Slideshow mode, the picture is displayed according to the picture file’s
orientation information and PF710’s orientation setting. If the PF710 orientation is horizontal, a landscape
picture fills most of the screen and a portrait picture is shown as a pillarboxed image with black bars on
either side of the picture. If the PF710 orientation is vertical, a landscape picture is shown as a letterboxed
image with black bars on top and bottom, and a portrait picture fills most of the screen (If a picture file
does not have any orientation information, the PF710’s orientation setting will not have any effect.) Note:
PF710 preserves the original aspect ratio of all images and does not stretch them to fill the entire screen.
To set the Orientation function:
1. Select Orientation from the Settings menu.
2. Use LEFT or RIGHT to highlight either “Landscape” or “Portrait.”
3. Press OK or
to confirm the new orientation.
Display
Use this function to adjust brightness and contrast of the screen.
Figure 27. Display settings
To adjust display settings:
1. Select Display from the Settings menu to open the Display settings, and use the UP and DOWN
buttons to highlight “brightness”, “contrast” and “fullscreen.”
2. Press OK or
to modify the selected item.
a. Brightness: Press LEFT or RIGHT to fine-tune the brightness of the screen.
b. Contrast: Press LEFT or RIGHT to make adjustments to the screen’s contrast.
c. Fullscreen: Press UP or DOWN to enable/disable. If disabled, PF710 will preserve the
Settings Setting Setting
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Transcend PF710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Transcend PF710 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info