485478
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
Troubleshooting
If a problem occurs with your MP300, please first check the information listed below before taking your MP300
for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service
center, or local Transcend branch office. We also have FAQ and Support services on our website.
Operating system cannot detect the MP300
Check the following:
Is your MP300 properly connected to the USB port? If not, unplug it and plug it in again.
Is your MP300 connected to the Mac keyboard? If so, unplug it and plug it into an available USB port
on your Mac computer.
Is the USB port enabled? If not, refer to the user’s manual of your computer (or motherboard) to
enable it.
The MP300 will not Power ON
Check the following:
Is the MP300 connected to your computer? If so, unplug it.
The battery may need to be recharged.
Try switching the player to the position for 5 to 10 seconds.
Cannot transfer files to the MP300
Unplug the MP300 from your computer, wait a moment, and plug it back in.
Cannot hearaudio playback
Have you transferred any music files to the MP300? If not, then you must first do so. (Only Mpeg I
Layer 3 and WMA files compressed at a rate of 32Kbps–320Kbps, and WAV files are supported.)
Are the earphones properly connected to the earphones jack? If not, reconnect them.
Is the volume loud enough? If not, increase the volume level until the music can be heard.
Track playback sounds intermittent
Unplug the earphones and plug them back in again to make sure they are securely connected.
Cannot find the file that was just copied to the MP300
Re-copy the file and refer to the Disconnecting from a Computersection to remove the MP300 after the copy
process is completed.
A File that was just deleted still appears
Re-delete the file and refer to the Disconnecting from a Computersection to remove the MP300 after the
delete process is completed.
MP300 does not operate after formatting in Windows
®
Formatting the MP300 using the “Quick Format,” or “Full Format” option in Windows
®
erases the default
system information that the MP300 requires to operate. To re-install the system information, please visit
www.transcend-info.com and download a Firmware Update for your MP300.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Transcend MP300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Transcend MP300 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info