664707

TP-LINK TL-WR902AC Manual

214
Zoom out
Zoom in
Previous page
1/221
Next page
207
FAQ
Q1. What should I do if I cannot access the internet?
• If using a cable modem, unplug the Ethernet cable and reboot the modem. Wait until
its Online LED is on and stable, then reconnect the Ethernet cable to the modem.
• If you’re in a hotel room or on a trade show, the internet may be limited and requires
that you authenticate for the service or purchase the Internet access.
• If your internet access is still not available, contact TP-Link Technical Support.
Q2. How do I restore the router to its factory default settings?
With the router powered on, press and hold the RESET button for about 5 seconds until
all the LEDs start flashing and then release the button.
Note: You’ll need to reconfigure the router to surf the Internet once the router is reset
Q3. What should I do if I forget my wireless password?
• If you have not changed the default Wireless Password, it can be found on the label
of the router.
• Otherwise, connect a computer to the router via an Ethernet cable. Log in to the web
management page, and go to Wireless 2.4GHz/5GHz > Wireless Security to retrieve
or reset your wireless password.
Q4. What should I do if I forget my login password of the web management
page?
The default username and password of the web management page are admin (in
lowercase). If you have altered the password:
1. Refer to FAQ > Q2 to reset the router.
2. Visit http://tplinkwifi.net, and enter admin (in lowercase) as both username and password to
log in.
Note: You’ll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q5. What should I do if my wireless signal is unstable or weak?
It may be caused by too much interference.
• Set your wireless channel to a different one.
• Choose a location with less obstacles that may block the signal between the router
and the host AP. An open corridor or a spacious location is ideal.
… 214 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR902AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR902AC in the language / languages: English as an attachment in your email.

The manual is 12,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR902AC

TP-LINK TL-WR902AC Quick start guide - English - 2 pages

TP-LINK TL-WR902AC Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info