664707

TP-LINK TL-WR902AC Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
©2017 TP-Link
At Home
Range Extender Mode
Internet
A
B
Host AP
Client Mode (TV/Game Console Adapter)
1. Switch the operation mode to AP/Rng Ext/Client and plug the
router’s adapter into an electrical outlet near your host AP.
2. Connect your device to the router wirelessly or via an Ethernet
cable. The Wi-Fi network names and password are on the router’s
label.
3. Launch a web browser and enter http://tplinkwifi.net in the address
bar. Log in with admin (in lowercase) for both username and
password.
4. Click Next to start the Quick Setup.
5. Select Client and click Next.
6. Click Connect to connect to the corresponding host network and
enter its password. Then click Next.
7. Select the LAN type of the router (Smart IP in most cases) and
click Next.
8. Click Finish to apply the settings.
9. Connect your wired-only device to the router via an Ethernet cable.
Internet
OR OR
A
B
Other Device
Smart TV Desktop
Host AP
1. Switch the operation mode to AP/Rng Ext/Client and connect the
hardware according to Step A to D in the left diagram.
2. Connect your device to the router wirelessly. The Wi-Fi network
names and password are on the router’s label.
3. Launch a web browser and enter http://tplinkwifi.net in the address
bar. Log in with admin (in lowercase) for both username and
password.
4. Click Next to start the Quick Setup.
5. Select Access Point and click Next.
6. Either customize your
Network Name
and
Password
for the
2.4GHz/5GHz wireless network or keep the default ones, and then
click
Next
.
7. Select the LAN type of the router (Smart IP in most cases) and
click Next.
8. Click Finish to apply the settings.
Access Point Mode
If you have changed the default Wi-Fi name(s) and password(s), you
have to reconnect your wireless devices to the new Wi-Fi network(s).
1. Switch the operation mode to AP/Rng Ext/Client and plug the
router’s adapter into an electrical outlet near your host AP.
2. Connect your device to the router wirelessly or via an Ethernet
cable. The Wi-Fi network names and password are on the router’s
label.
3. Launch a web browser and enter http://tplinkwifi.net in the address
bar. Log in with admin (in lowercase) for both username and
password.
4. Click Next to start the Quick Setup.
5. Select Range Extender and click Next.
6. Click Connect to connect to the corresponding host network and
enter its password. You can either copy the SSID (network name) of
the host network or customize it, and then click Next.
7. Select the LAN type of the router (Smart IP in most cases) and
click Next.
8. Click Finish to apply the settings.
9. Relocate the router about halfway between your host AP and the
Wi-Fi dead zone.
The extended network shares the same Wi-Fi password as that of your
host network, but may have dierent wireless network name if you have
customized it during the conguration.
Internet
B C
D
A
Wired Router
LEDs:
Hardware Information
Blinking
WPS connection is in progress.
No WPS connection is established.
This light stays on for 5 minutes when a WPS
connection is established, then goes o.
IndicationStatusLED
On
On
On
Blinking
O
Blinking
(Power)
(Internet)
(Wireless)
(USB)
(WPS)
O
On
On
O
O
The router is on.
The internet is available.
The wireless network is enabled.
The wireless network is disabled.
The router is connecting to the host network
when in Range Extender or Client mode.
The internet is unavailable.
A USB device is connected.
No USB device is connected.
The router is initializing or being upgraded.
(WPS)
Buttons and Ports:
DescriptionPorts
Mode Switch
WAN/LAN
Power
3G/4G USB
RESET
The port is used to connect the power adapter.
This port functions as the WAN port in Router
mode and as the LAN port in Hotspot, Access
Point, Range Extender and Client mode.
To reset the router, use a pin to press and hold
the button for about 5 seconds.
This port is used to plug a 3G/4G modem or a
USB disk into.
To establish WPS connection, press this button.
This button is used to switch the operation
mode of the router.
For technical support and other information, please visit http://www.tp-link.com/support
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR902AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR902AC in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR902AC

TP-LINK TL-WR902AC User Manual - English - 221 pages

TP-LINK TL-WR902AC Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info