684284
37
Zoom out
Zoom in
Previous page
1/64
Next page
34
Chapter 4
Congure the Router
RADIUS Port - Enter the port that the Radius server uses.
RADIUS Password - Enter the password for the Radius server.
WEP: Select this option to enable basic authentication method if any of your client
devices can only access the wireless using WEP (Wired Equivalent Privacy). If you
select this option, configure the following parameters:
Type - Select an authentication type for your wireless network. The default is
Auto, which automatically chooses Open System or Shared Key based on the
capability and access request of the wireless client.
WEP Key Format - Either use ASCII format or select Hexadecimal. ASCII format
is a combination of alphabetic and numeric characters. Hexadecimal format is
a combination of the number (0-9) and letters (A-F, a-f).
Key Type/Key Value - Select a key type option and enter a key value. The 64-
bit option allows you to enter 10 hexadecimal digits (0-9, A-F, a-f) or 5 ASCII
characters into the Key Value field. The 128-bit option allows you to enter 26
hexadecimal digits (0-9, A-F, a-f) or 13 ASCII characters into the Key Value field.
Channel - Select an operating channel for the wireless network. The default channel
is Auto. Do not change it unless you are experiencing the intermittent wireless
connection issue.
Mode - Select a transmission mixed mode.
Channel Width - Select a channel width (bandwidth) for the wireless network.
Transmit Power - Select either High, Middle, or Low to specify the data transmit power.
The default and recommended setting is High.
AP Isolation - Select this checkbox to enable the AP Isolation feature that allows you
to confine and restrict all wireless devices on your network from interacting with each
other, but still able to access the Internet. AP isolation is disabled by default.
Enable WMM - The WMM function guarantees the packets with high-priority messages
being transmitted preferentially. It is enabled by default and highly recommended.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR820N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR820N in the language / languages: English as an attachment in your email.

The manual is 9,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR820N

TP-LINK TL-WR820N Installation Guide - English - 2 pages

TP-LINK TL-WR820N Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info