521052
14
Zoom out
Zoom in
Previous page
1/124
Next page
TL-WR1042ND 300Mbps Wireless N Gigabit Router
) Note:
1. After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2. Pressing the Wireless On/Off button for two seconds will turn on/off the wireless radio. When
the WIRELESS LED flashes, the wireless function has been enabled. When the WIRELESS
LED is off, the wireless function has been disabled.
1.4.2 The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
¾ POWER: The Power socket is where you connect the power adapter. Please use the power
adapter provided with this TL-WR1042ND 300Mbps Wireless N Gigabit Router.
¾ WPS: If your client device such as wireless adapter supports WPS (Wi-Fi Protected Setup),
use this button to automatically establish a WPA secure connection between the client
device and the router.
¾ RESET:
There are two ways to reset to the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the
router's Web-based Utility.
2) Use the Factory Default Reset button: Use a pin to press and hold the RESET button for
8 seconds and then wait for the router to reboot.
¾ USB: The USB port connects to a USB storage device or a USB printer.
¾ INTERNET: This port is where you will connect the DSL/cable Modem, or Ethernet.
¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the router to the local PC(s).
¾ Wireless antenna: To receive and transmit the wireless data.
-5-
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WR1042ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WR1042ND in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WR1042ND

TP-LINK TL-WR1042ND Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info