521019
29
Zoom out
Zoom in
Previous page
1/47
Next page
TL-WPA4220/TL-WPA2220 300Mbps AV500/AV200 WiFi Powerline Extender
22
¾ RTS Threshold - Specifies the RTS (Request to Send) Threshold. If the packet is larger than the
specified RTS Threshold size, the device will send RTS frames to a particular receiving station and
negotiate the sending of a data frame. The default value is 2346.
¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be
fragmented. Setting the Fragmentation Threshold too low may result in poor network performance
since excessive packets. 2346 is the default setting and is recommended.
¾ DTIM Interval - Determines the interval of the Delivery Traffic Indication Message (DTIM). You can
specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the
DTIM Interval is the same as Beacon Interval.
¾ Enable WMM - WMM function can guarantee the packets with high- priority messages being
transmitted preferentially. It is strongly recommended that this function be enabled.
¾ Enable Short GI - This function is recommended for it will increase the data capacity by reducing
the guard interval time.
¾ Enable AP Isolation - Isolates all connected wireless stations so that wireless stations cannot
access each other through WLAN. This function will be disabled if WDS/Bridge is enabled.
)
Note:
If you are not familiar with the setting items on this page, it's strongly recommended that you keep the
provided default values; otherwise, it may result in low wireless network performance.
3.4.5 Wireless Statistics
Selecting W
ireless > Wireless Statistics will allow you to see the wireless transmission information in
the following screen shown in Figure 3-17. This page shows MAC Addres
s, Current Status, Received
Packets and Sent Packets for each connected wireless station.
Figure 3-17 Statistics of the device attached wireless stations
¾ MAC Address - Shows the connected wireless station's MAC address.
¾ Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC
/ STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected.
¾ Received Packets - Packets received by the station.
¾ Sent Packets - Packets sent by the station.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the
next page and click the Previous button to return to the previous page.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WPA4220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WPA4220 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WPA4220

TP-LINK TL-WPA4220 Installation Guide - English - 2 pages

TP-LINK TL-WPA4220 Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info