761147
2
Zoom out
Zoom in
Previous page
1/2
Next page
Q1. What should I do if the Tether app cannot nd my device?
• Follow the steps below:
1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, turn o
your cellular data.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
• You may have entered incorrect Wi-Fi password for your host router during the
conguration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
LED Explanation
Method 2: Via a Web Browser
Method 1: Via the Tether App
1. Connect your computer or smartphone to the extender’s network
.
If you
are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar,
and log in.
3. View or change extender settings as needed.
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
http://tplinkrepeater.net
http://tplinkrepeater.net
Note: If your extender and router use the same network name, Method 1 is recommended.
LED Status Indication (For Range Extender Mode)
The extender is on or o.
The system is starting up or rmware upgrade is in
progress.
The light remains on for 5 minutes when a WPS
connection is established, then turns o.
WPS connection is in progress.
(Power)
On/O
Blinking
On/O
Blinking
The extender is connected to your router’s
wireless network and is in a suitable location.
The extender is receiving a weak signal. Try
relocating it closer to your router.
No wireless connection is established.
(Signal)
WPS
Green
Red
O
Tether
For technical support, the user guide and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.
Safety Information
Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of
the devices, but devices of the same or another type not be stacked in normal use.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please
use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The
original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
< Settings
My Devices
Local Device
TL-WA860RE
XX-XX-XX-X X-X X-XX
• If you have enabled wireless MAC ltering, wireless access control, or access
control list (ACL) on your router, disable them rst, then follow any method on the
front page to complete the conguration.
• Try setting up via the WPS button.
Reset the extender and go through the conguration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the RESET button for 1 second.
The extender will reboot.
If you have any suggestions or needs for our product guides,
you are welcome to email techwriter@tp-link.com.cn.
To communicate with TP-Link users or engineers, please join the
TP-Link Community at https://community.tp-link.com.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WA860RE v6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WA860RE v6 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WA860RE v6

TP-LINK TL-WA860RE v6 Installation Guide - English - 8 pages

TP-LINK TL-WA860RE v6 User Manual - English - 39 pages

TP-LINK TL-WA860RE v6 Quick start guide - All languages - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info