578331
21
Zoom out
Zoom in
Previous page
1/42
Next page
TL-WA854RE
300Mbps Universal WiFi Range Extender User Guide
MAC Address - The physical address of the LAN port, as seen from the LAN. The value
cannot be changed.
Type - Several IP types are supported, including: (1) Dynamic IP; (2) Static IP, and they are
explained below.
Dynamic IP - In this type, if your range extender have connected to a router, your client
will dynamically get a IP Address/Gateway from the router, otherwise the client will get a
IP Address/Gateway in the same network as you set below. And this type is
recommended.
Static IP - In this type, you can configure IP Address/Gateway manually.
IP Address - Enter the IP address of your Range Extender in dotted-decimal notation (factory
default setting is 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.
Note:
1. The IP parameters cannot be configured if you have chosen Dynamic IP. In this situation the
device will automatically configure the IP parameters appropriate to your need.
2. If you are not familiar with the setting items in this page, it's strongly recommended to keep
the provided default values, otherwise may result in lower wireless network performance or
even can't work.
3. If you choose Static IP, the domain name log in function won't work, and you have to use the
IP you set to log in the Range Extender's web based utility.
4.4.2 DHCP Settings
DHCP stands for Dynamic Host Configuration Protocol. The DHCP Server will automatically
assign dynamic IP addresses to the computers on the network. This protocol simplifies network
management and allows new wireless devices to receive IP addresses automatically without the
need to manually assign new IP addresses.
Selecting Network > DHCP Settings will enable you to set up the Range Extender as a DHCP
(Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the
PCs that are connected to the system on the LAN. The DHCP Server can be configured on the page
(shown as Figure 4-9), only when you’ve set the Network LAN type as Static IP in Figure 4-6.
Note:
The DHCP Settings function cannot be configured if you have chosen Dynamic IP in Network ->
LAN, in which situation the device will help you configure the DHCP automatically as you need.
The DHCP Settings page will appear as Figure 4-8.
14
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-WA854RE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WA854RE in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WA854RE

TP-LINK TL-WA854RE Installation Guide - English - 2 pages

TP-LINK TL-WA854RE User Manual - German - 36 pages

TP-LINK TL-WA854RE Quick start guide - German - 2 pages

TP-LINK TL-WA854RE User Manual - Dutch - 3 pages

TP-LINK TL-WA854RE Quick start guide - All languages - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info