Manual TP-LINK TL-WA5210G (page 13 of 114) (English)

521068

Zoom out

Zoom in

1/114

: This is where you can connect an outside antenna. For this AP, the antenna is built inside,

and usually there is not necessary to connect an outside one.

¾ LAN: This port is used to connect to the POE port of the provided Power Injector.

¾ RESET:

There are two ways to reset the AP's factory defaults:

• Use the Factory Defaults function on System Tools -> Factory Defaults page in the

AP's Web-based Utility.

• Use the Factory Default Reset button: Press and hold the RESET button for at least 5

seconds, and then the AP reboots after the LED at the rightmost in Figure 2-1 flashes.

)

Note:

Ensure the AP is powered on before it restarts completely.

2.3 System Requirements

¾ Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45

connectors

¾ TCP/IP protocol must be installed on each PC

¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later

¾ If the device is configured to AP client router mode, you also need:

Wireless Internet Access Service (WISP).

¾ If the device is configured to AP router mode, you also need:

Broadband Internet Access Service (DSL/Cable/Ethernet)

¾ One DSL/Cable Modem that has an RJ45 connector (you do not need it if you connect the

router to the Ethernet)

2.4 Environment Requirements

¾ Do not place in direct sunlight or near a heater or heating vent

¾ Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all

sides of the router

¾ Well ventilated (especially if it is in a closet)

¾ Operating temperature: -20℃~65℃

¾ Operating Humidity: 10%~90% RH, Non-condensing

2.5 Connecting the Device

Figure 2-3 is an example of an infrastructure network incorporating the TL-WA5210G. An

Infrastructure network contains an access point or a wireless router. To establish an infrastructure

network in AP mode, please take the following steps:

1. You will need broadband Internet access (a Cable or DSL-subscriber line into your home or

office). Consult with your Cable or DSL provider for proper installation of the modem.

2. Connect the Cable or DSL modem to a Router. Quickly install the router.

3. Locate an optimum location for the AP. Choose an elevated location where trees, buildings

and large steel structures will not obstruct the antenna signals and which offers maximum line

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-WA5210G in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-WA5210G

TP-LINK TL-WA5210G Installation Guide - English - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TP-LINK TL-WA5210G Manual

Product: