Manual TP-LINK TL-SL2218 (page 20 of 28) (English)

521174

Zoom out

Zoom in

1/28

Smart Switch





Please connect the Ethernet ports of the switch to the network devices by RJ45 cable

as the following figure shown.

RJ45 Port

RJ45 Cable

Connecting the RJ45 PortFigure 4-1



Connect the SFP port to a SFP module. For the switch, if an SFP transceiver (purchased

separately) is installed in a slot and has a valid link on the port, the associated RJ45

port will be disabled and cannot be used.

SFP Port

Connecting the LAN PortFigure 4-2

Note:

SFP module supports hot-plugging, plug the SFP module into the SFP port and the



switch can identify it automatically.

The SFP port



supports 100/1000Base-FX SFP module at full-duplex mode. When

using a SFP module, you need to log on to the GUI of the switch and configure the

corresponding Speed and Duplex mode on Switching

→

Port

→

Port Config page.

For 100M module, please select 100MFD while select 1000MFD for gigabit module. By

default, the Speed and Duplex mode of SFP mode is 1000MFD.

Connection

SFP Module

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-SL2218 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-SL2218

TP-LINK TL-SL2218 User Manual - English - 142 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TP-LINK TL-SL2218 Manual

Product: