521122
131
Zoom out
Zoom in
Previous page
1/183
Next page
Chapter 11 PoE
Note:
Only TL-SG2424P supports PoE function.
PoE (Power over Ethernet) technology describes a system to transmit electrical power along with
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
Composition
A PoE system usually consists of PSE and PD.
PSE: Power sourcing equipment (PSE) is a device such as a switch that provides power on the
Ethernet cable to the linked device.
PD: A powered device (PD) is a device accepting power from the PSE and thus consumes energy.
PDs falls into two types, standard PDs and nonstandard PDs. Standard PDs refer to the powered
devices that comply with IEEE 802.3af and IEEE 802.3at. Examples include wireless LAN access
points, IP Phones, IP cameras, network hubs, embedded computers etc.
Advantage
Cheap cabling: The remote device such as cameras can be powered by PSE in no need
of prolonging its power cord additionally and Ethernet cable is much cheaper than AC
wire or power cord.
Easy to connect: PoE uses only one Ethernet cable with no need of external power
supply.
Reliable: A powered device can be either powered by PSE using Ethernet cable or
powered through the provided power adapter. It is very convenient to provide a backup
power supply for the PDs.
Flexibility: In compliance with IEEE 802.3af and IEEE 802.3at, global organizations can
deploy PoE everywhere without concern for any local variance in AC power standards,
outlets, plugs, or reliability.
Wide use: It can be applied to wireless LAN access points, IP Phones, IP cameras,
network hubs, embedded computers etc.
TL-SG2424P Gigabit Smart Switch is a Power Sourcing Equipment (PSE). All the
Auto-Negotiation RJ45 ports on the switch support Power over Ethernet (PoE) function, which can
automatically detect and supply power for those powered devices (PDs) complying with IEEE
802.3af and IEEE 802.3at. The maximum power the TP-LINK PoE switch can supply is 320W and
the maximum power each PoE port can supply is 30W.
PoE function can be configured in the two sections, PoE Config and PoE Time-Range.
11.1 PoE Config
All the RJ45 ports on the switch can be configured to supply power for the powered devices that
comply with IEEE 802.3af and IEEE 802.3at. As the power every port or the system can provide is
limited, some attributes should be set to make full use of the power and guarantee the adequate
power to the linked PDs. When the power exceeds the maximum power limit or the power is
inadequate to power the device, the switch may disconnect the power supply to the PD linked to
the port with lower priority. When detecting a PD is unplugged, the switch will stop supplying the
power to the PD.
123
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-SG2424P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-SG2424P in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info