605847
70
Zoom out
Zoom in
Previous page
1/94
Next page
62
Appendix A: Troubleshooting & FAQ
Question Answer or Resolution
Features
The video and audio
codec is adopted in the
camera.
The camera utilizes H.264, MPEG4 and JPEG triple
compression to provide high quality images. H.264 and MPEG4
are standards for video compression and JPEG is a standard for
image compression.
The audio codec is defined as AMR for 3GPP and G.711/G.726
for RTSP streaming.
The maximum number of
users accessing the
camera simultaneously.
The maximum number of users is limited to 20. However, it also
depends on the total bandwidth accessed to this camera from
clients. The maximum data throughput of the camera is around
20~25Mbps for UDP mode and 10Mbps for HTTP mode.
Therefore, the actual number of connected clients varies by
streaming mode, settings of resolution, codec type, frame rate
and bandwidth. Obviously, the performance of the each
connected client will slow down when many users are logged on.
The camera can be used
outdoors or not.
The camera is not weatherproof. It needs to be equipped with a
weatherproof case for outdoors using. However, equipped with a
weatherproof case might disable the audio function of the
camera.
Install this camera
Status LED does not light
up.
z Check and confirm that the DC power adaptor, included in
package, is used. Secure the power connector and re-power it
on again.
z If the problem is not solved, the camera might be faulty.
Contact your dealer for further help.
The network cabling is
required for the camera.
The camera uses Category 5 UTP cable allowing 10 and/or 100
Base-T networking.
The camera will be
installed and work if a
firewall exists on the
network.
If a firewall exists on the network, port 80 is open for ordinary
data communication. The HTTP port and RTSP port need to be
opened on the firewall or NAT router.
The username and
password for the first time
or after factory default
reset
Username is admin and password is admin.
Note that it’s all case sensitive.
Forgot the username and
password
Follow the steps below.
1. Restore the factory default setting by pressing and holding
down more than 5 seconds on the camera.
2. Reconfigure the camera.
Forgot the IP address of
the camera.
Check IP address of camera by using the IP Search program or
by UPnP discovery.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-SC3230N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-SC3230N in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-SC3230N

TP-LINK TL-SC3230N Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info