605847
13
Zoom out
Zoom in
Previous page
1/94
Next page
5
2.2 Bottom View
Audio Output Jack: Audio-out Jack allows this camera to output audio or alerting sound.
DC Power Jack: The input power is 12VDC. Supply the power to the camera with the power
adapter included in package. Otherwise, the improper power adapter may damage the unit and
result in danger.
Factory Default Reset: This button is hidden in the pinhole. This button is used to restore the all
factory default settings. Sometimes restarting the camera will make the system back to a normal
state. If the system still got problems after restart, the user can restore the factory default settings
and install it again. To restore the camera, please follow the steps below:
1. Make sure the camera is ready first. Insert the paper clip or other tool and press and hold the
button down continuously.
2. Hold it for at least 5 seconds and release the tool while the camera is operating. Then the
camera has been restored to default settings and reboot again.
)
Note:
Restoring the factory default setting will lose all previous settings included IP address forever.
The user needs to run the IP Search program to search the camera and configure it to let the
camera work properly again.
LAN Port: The LAN port is a RJ45 connector for connections to 10Base-T Ethernet or
100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or
negotiate the transmission speed of the network automatically. Please use Category 5 cable to
connect the camera to a 100Mbps Fast Ethernet network switch or hub.
LAN LED (green color): This LED will be flashing while network accessing via Ethernet.
Power / Wireless LED (orange color): This LED is used to indicate whether the camera is ready
or not. In addition, this LED will be flashing when the camera is connected to a wireless network
(WLAN model only).
LAN Port
DC Power
Jack
Factory
Default Reset
Audio
Output Jack
Power/Wireless
LED
LAN LED
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-SC3230N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-SC3230N in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-SC3230N

TP-LINK TL-SC3230N Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info