714440

TP-LINK TL-PA4010P Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
TL-PA4010P AV500 Passthrough Powerline Adapter
8
Chapter 3 Advanced Feature: How to Use the Pair Button
3.1 Pair (Secure with 128 bits-AES)
The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data
between powerline adapters. For the powerline adapters to communicate with each other they all need
to use the same Network Membership Key (NMK). Otherwise, they cannot unscramble the encrypted
data sent in the powerline network.
The Pair button allows you to set up a secure powerline connection with other HomePlug AV compliant
powerline devices which also support the Pair feature.
3.2 Set Up a Secure Powerline Network
You can connect a number of devices on a powerline network, but you can only use the Pair button on
two devices at a time.
Create a secure Powerline network using the Pair button：
Step 1. Press the Pair button of Powerline adapter A for one second, the Power LED will start flashing.
Step 2. Press the Pair button of Powerline adapter B for one second, the Power LED will start flashing.
(This must be done within 2 minutes after pressing the pair button of powerline adapter A.)
Step 3. Wait until the Power LED on both adapters stops flashing and Powerline LED becomes solid
on, and the pairing is completed.
Join an existing secure Powerline Network:
Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants
to join this network.
Step 1. Press and hold the Pair button on Powerline adapter C for one second.
Step 2. Press and hold the Pair button on Powerline adapter A/B for one second.
(This step must be taken within 2 minutes after step 1 is finished.)
Step 3. Wait until the Power LED on both adapters stops flashing and Powerline LED becomes solid
on, and the pairing is completed.
Note:
The sequence of Step 1 and Step 2 can be exchanged.
Leave an existing secure Powerline Network:
Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one
device (Powerline adapter A) from this network.
Step 1. Press and hold the Pair button on Powerline adapter A for about 8 seconds. Powerline adapter
A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish
during resetting, flash during restarting then illuminate steadily.)
Step 2. Wait for the reset to complete.
3.3 Reset
To reset the powerline adapter：
Press and hold the Pair button for more than 15 seconds, and then release the button. You will see all
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-PA4010P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-PA4010P in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-PA4010P

TP-LINK TL-PA4010P Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info