485505
162
Zoom out
Zoom in
Previous page
1/167
Next page
-157-
Appendix B FAQ
Q1. What can I do if I cannot access the web-based configuration page?
1. For the first login, please try the following steps:
1) Make sure the cable is well connected to the LAN port of the Router. The corresponding LED
should flash or be solid light.
2) Make sure the IP address of your PC is set in the same subnet addresses of the Router. It’s
recommended to set your PC to get the IP address automatically. Then the Router with DHCP
enabled can automatically assign the IP address to your PC. If you want to configure your PC
manually, please set 192.168.0.x ("x" is any number between 2 to 254) for the IP address and
255.255.255.0 for the Subnet Mask.
3) Test the connection between your PC and TL-ER6120 via Ping command.
4) If you still cannot access the configuration page, please restore your Router to its factory
default settings and try to log in again.
2. If your management port has been changed, please log into the Router with the new address,
such as http://192.168.0.1:XX
(“XX” is the new management port number).
3. If you had successfully logged into the Router before, but now you cannot access the Router. It’s
quite possible that the configuration of your Router has been changed by others, especially when
the Remote Web Management function is enabled. You’re recommended to restore your Router
and reconfigure the management port number and the username as well as the password for your
network security.
4. If you cannot access the Router even after restoring the Router to its defaults, or your login is
dropped down just after a while, it’s quite possible that your Router is attacked by ARP cheating.
It’s recommended to locate and quarantine the source of ARP cheating so as to prevent your
network from the attacks.
5. Check to see if you have configured the proxy server for IE browser. If so, please disable the IE
proxy server first.
Q2: What can I do if I forgot the username and the password of the Router? How to restore the
Router to its factory default settings?
You can restore the Router to its factory default settings by the Reset button. It must be noted that
once the Router is reset, all the current configuration settings will be lost.
With the Router powered on, use a pin to press and hold the Reset button for about 5~10 seconds.
After the M1 LED is solid light for 2~5 seconds, release the Reset button. When the M1 and M2 LEDs
flash simultaneously for about one second, the Router is restored successfully. The default
management address of the Router is http://192.168.0.1, and the default username and the password
are both admin.
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-ER6120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-ER6120 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TL-ER6120

TP-LINK TL-ER6120 Installation Guide - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info