664765

TP-LINK TL-ER604W Manual

71
Zoom out
Zoom in
Previous page
1/179
Next page
- 64-
Name: Enter a name for Port Triggering entries. Up to 28 characters can be
entered.
Interface: Select an interface for forwarding data packets.
Trigger Port: Enter the trigger port number or the range of port. Only when the
trigger port initiates connection will all the corresponding incoming
ports open and provide service for the applications, otherwise the
incoming ports will not open.
Trigger Protocol: Select the protocol used for trigger port.
Incoming Port:
Enter the incoming port number or range of port numbers. The
incoming port will open for follow-up connection after the trigger
port initiates connection.
Incoming Protocol: Select the protocol used for incoming port.
Status: Activate or inactivate the entry.
Note:
The Trigger Port and Incoming Port should be set in the range of 1-65535. The Incoming Port
can be set in a continuous range such as 8690-8696.
The router supports up to 16 Port Triggering entries. Each entry supports at most 5 groups of
trigger ports and overlapping between the ports is not allowed.
Each entry supports at most 5 groups of incoming ports and the sum of incoming ports you set
for each entry should not be more than 100.
List of Rules
In this table, you can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 3-38 indicates that: This is a Port Triggering entry named host1, When
the LAN host initiates a TCP request via port of 5354, and the incoming port 5355 of WAN1 will
open for TCP and UDP protocol. This entry is activated.
3.4.1.6 ALG
Some special protocols such as FTP, H.323, SIP, IPsec and PPTP will work properly only when ALG
(Application Layer Gateway) service is enabled.
Choose the menu Advanced→NAT→ALG to load the following page.
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TL-ER604W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TL-ER604W in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info