664645
33
Zoom out
Zoom in
Previous page
1/98
Next page
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
4.4.4 LAN
4.4.4.1 IPv4 LAN Config
Choose “Advanced SetupLAN”, and you will see the LAN screen (shown in Figure 4-21), the
section allows you to configure the ro
uter’s LAN ports settings.
Figure 4-21
IP Address: You can configure the router’s IP Address and Subnet Mask for LAN Interface.
IP Address: Enter the router’s local IP Address, then you can access to the Web-based
Utility via the IP Address, the default value is 192.168.1.1.
Subnet Mask: Enter the router’s Subnet Mask, the default value is 255.255.255.0.
Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard
Mode or Blocking Mode.
Enable LAN side firewall: You can click the check box to enable LAN side firewall.
DHCP Server: These settings allow you to configure the router‘s Dynamic Host Configuration
Protocol (DHCP) server function. The DHCP server is enabled by default for the router’s
Ethernet LAN interface. DHCP service will supply IP settings to computers which are
configured to automatically obtain IP settings that are connected to the router though the
Ethernet port. If you enable the DHCP server, the router becomes the default gateway for
DHCP client connected to it. Keep in mind that if you change the IP address of the router, you
must change the range of IP addresses in the pool used for DHCP on the LAN.
Start IP Address: Enter a value for the DHCP server to start with when issuing IP
addresses. Because the default IP address for the router is 192.168.1.1, the default Start
26
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK TD-W8950N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK TD-W8950N in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK TD-W8950N

TP-LINK TD-W8950N Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info