664771
24
Zoom out
Zoom in
Previous page
1/32
Next page
JetStream Gigabit L2 Managed Switch
20
Conguration
Figure 5-3 Main Page of the Switch
5.2 Configure the Switch Using CLI
You can log on to the switch and access the CLI by the following two methods:
Log on to the switch by the Console (USB) port or Console (RJ-45) port on the switch.
Log on to the switch remotely by a Telnet or SSH connection through an Ethernet port.
Logon by a Console Port
The switch has two console ports: an RJ-45 console port and a Micro-USB console port. Console
output is active on devices connected to both console ports, but console input is only active on one
console port at a time. The Micro-USB connector takes precedence over the RJ-45 connector.
Install the TP-Link USB Console Driver if you are using the USB serial port for the first time on a
Windows-based PC
.
The driver can be found on the attached CD and Download page of our official
website. Refer to the User Guide to learn more about the installation.
To log on to the switch by the console port on the switch, please take the following steps:
1. Connect the PC or terminal to the console port on the switch by the provided cable. Refer to 4.3
Console Port to learn how to connect.
2. If you attach a PC, start the terminal emulation program (such as the Hyperterminal)on the PC.
3. Specify the connection COM port in the terminal emulation program. If the Micro-USB console
port is used, you can view which COM port number is assigned to the USB serial port in the
following path: Control Panel -> Hardware and Sournd -> Device Manager -> Ports -> USB Serial
Port.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T2600G-18TS-TL-SG3216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T2600G-18TS-TL-SG3216 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info