664775
23
Zoom out
Zoom in
Previous page
1/28
Next page
19
L2 Managed Switch
Troubleshooting
Appendix A Troubleshooting
Q1. What could I do if I forgot the username and password of the switch?
1. Connect the console port of the PC to the console port of the switch and open hyper
terminal.
2. Power o and restart the switch. When you are prompted that “Press CTRL-B to enter
the bootUtil” in the hyper terminal, please press CTRL-B key to enter into bootUtil menu
shown as the following gure.
Enter the reset command to reset the system. The system will be reset to the factory
default settings, and the default login user name and password are both admin.
Q2. Why does the Power LED work abnormally?
The Power LED should be lit up when the power system works normally. If the Power LED
worked abnormally, please take the following steps:
1. Make sure that the power cable is connected properly, and the power contact is normal.
2. Make sure the voltage of the power supply meets the requirement of the input voltage
of the switch.
Q3. What could I do if I could not access the web-based conguration page?
You are recommended to check the following items:
1. Check every port LED on the Switc and make sure the cable is installed properly.
2. Try another port on the switch and make sure the cable meets the requirement and
works normally.
3. Turn o the power. After a while, turn on the power again.
4. Make sure the IP address of your PC is set within the subnet of the switch.
5. If you still cannot access the conguration page, please restore the switch to its factory
defaults. Then the IP address should be set as 192.168.0.x ("x" is any number from 2 to
254) and Subnet Mask as 255.255.255.0.
Q4. Why does the hyper terminal display abnormally?
Please check as follows:
1. Make sure the power supply is normal and the console cable is properly connected.
2. Check if the console cable is the right type.
3. Ensure the parameters of the hyper terminal are correct: congure Bits per second as
38400, Data bits as 8, Parity as None, Stop bits as 1, and Flow control as None.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T2500-28TC-TL-SL5428E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T2500-28TC-TL-SL5428E in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK T2500-28TC-TL-SL5428E

TP-LINK T2500-28TC-TL-SL5428E User Manual - English - 342 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info