714419

TP-LINK T1600G-28TS (TL-SG2424) Manual

760
Zoom out
Zoom in
Previous page
1/771
Next page
Configuring SNMP & RMON Configuration Example
Configuration Guide
737

Configuring SNMP
1) Enable SNMP and specify the remote engine ID.
Switch#configure
Switch(config)#snmp-server
Switch(config)#snmp-server engineID remote 123456789a
2) Create a view with the name View; set the MIB Object ID as 1 (which represents all
functions), and the view type as Include.
Switch(config)#snmp-server view View 1 include
3) Create a group of SNMPv3 with the name of nms-monitor. Enable Auth Mode and
Privacy Mode, and set the view as read View and notify view.
Switch(config)#snmp-server group nms-monitor smode v3 slev authPriv read View
notify View
4) Create an SNMP user with the name admin. Set the user as a remote user and configure
the security mode and security level based on the group. Set the Auth Mode as SHA
algorithm, password as 1234, the Privacy Mode as DES, and password as 1234.
Switch(config)#snmp-server user admin remote nms-monitor smode v3 slev authPriv
cmode SHA cpwd 1234 emode DES epwd 1234
5) To configure Notification, specify the IP address of the NMS host and UDP port. Set the
User, Security Model and Security Level according to configurations of the SNMP User.
Choose the type as Inform, and set the retry times as 3, and the timeout period as 100
seconds.
Switch(config)#snmp-server host 172.168.1.222 162 admin smode v3 slev authPriv
type inform retries 3 timeout 100

Enable Bandwith-control Trap
Switch(config)#snmp-server traps bandwidth-control

Configuring RMON
1) Create two Statistics entries to monitor ports 1/0/1 and 1/0/2 respectively. The owner
of the entries is set as monitor, and the status is set as valid.
Switch(config)#rmon statistics 1 interface gigabitEthernet 1/0/1 owner monitor status
valid
Switch(config)#rmon statistics 2 interface gigabitEthernet 1/0/2 owner monitor status
valid
2) Create two history entries and bind them to ports 1/0/1 and 1/0/2 respectively. Set the
sample interval as 100 seconds, max buckets as 50, and the owner as monitor.
Switch(config)#rmon history 1 interface gigabitEthernet 1/0/1 interval 100 owner
monitor buckets 50
… 760 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28TS (TL-SG2424) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28TS (TL-SG2424) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info