714421

TP-LINK T1600G-28PS (TL-SG2424P) Manual

729
Zoom out
Zoom in
Previous page
1/771
Next page
Configuration Guide 706
Configuring SNMP & RMON SNMP Configurations
2.2.4 Creating SNMP Users
Configure users of the SNMP group. Users belong to the group, and use the same security
level and access rights as the group.
Step 1 configure
Enter global configuration mode.
Step 2 snmp-server user
name
{ local | remote }
group-name
[ smode { v1 | v2c | v3 }] [ slev {
noAuthNoPriv | authNoPriv | authPriv }] [ cmode { none | MD5 | SHA }] [ cpwd
confirm-pwd
] [
emode { none | DES }] [ epwd
encrypt-pwd
]
Configure users of the SNMP group.
name :
Enter the user name with 1 to 16 characters.
local | remote :
Choose a user type. Local indicates that the user is connected to a local
SNMP engine, while remote means that the user is connected to a remote SNMP engine.
group-name :
Enter the name of the group which the user belongs to. The group is
determined by the group name, security mode and security level.
v1 | v2c | v3 :
Choose a security mode for the SNMP group from the following: SNMPv1,
SNMPv2c, SNMPv3.
noAuthNoPriv | authNoPriv | authPriv :
For SNMPv3 groups, choose a security level from
noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no
encryption), authPriv (authorization and encryption). The defaut is noAuthNoPriv. Please
note that if you have chosen v1 or v2c as the security mode, security level cannot be
configured.
none | MD5 | SHA :
Choose an authentication algorithm which is only for the user of
SNMPv3. SHA authentication mode has a higher security than MD5 mode. By default, the
Authentication Mode is none.
confirm-pwd :
Enter an authentication password with 1 to 16 characters excluding question
mark and space. This password in the configuration file will be displayed in the symmetric
encrypted form.
none | DES :
Choose a privacy mode which is only for the user of SNMPv3. None indicates
no privacy method is used, and DES indicates DES encryption method is used. By default,
the Privacy Mode is none. Please note that if you have chosen v1 or v2c as the security
mode, the privacy mode cannot be configured.
encrypt-pwd :
Enter a privacy password with 1 to 16 characters excluding question mark
and space. This password in the configuration file will be displayed in the symmetric
encrypted form.
Step 3 show snmp-server user
Displays the information of SNMP users.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create an SNMP user on the switch. Name the user
as admin, and set the user as a remote user, SNMPv3 as the security mode, authPriv as the
… 729 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info