605834
2
Zoom out
Zoom in
Previous page
1/2
Next page
The extender can be used as a wireless adapter to connect any Ethernet-only device (such
as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router using Option ONE or Option TWO, then connect the
extender to your Ethernet-only device via an Ethernet cable.
Entertainment Adapter
Tether app provides a simple, intuitive way to access, manage your extender using
your iOS or Android devices.
1. Scan the QR code or search the keywords “TP-LINK Tether” to
download the app from the App Store or Play Store.
2. Ensure your smart device is wirelessly connected to the extender.
3. Launch the app and start managing your extended network.
Block network access
from specific devices
Turn off the LED
at the specific time
Change the basic
extended network settings
Do initial configuration
of your extender
TP-LINK Tether App
Tether
How to
begin?
Using WPS (Wi-Fi Protected Setup)
Please use Option ONE if your router does not support WPS.
Option TWO
Plug the extender into an electrical outlet about halfway
between your router(Host Network) and the Wi-Fi dead
zone.
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve a good (or better) signal
quality.
1
2
Ideal extender Placement
Host Network
Extended Network
Red
Too far away
Blue
Ideal location
Smart TV
Game Console
Router
Both extended networks share the same SSID (network name) and password as your host network.
Enjoy!
Plug the extender into an electrical outlet
near your router, and wait until the POWER
LED is lit and solid blue.
Power On Connect
Relocate
A1. Make sure your computer is connected to the Extended network SSID or connect your
computer to the extender using an Ethernet cable.
A2. Change the computer’s fixed IP address to “Obtain an IP Address Automatically”.
A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter.
Q3. What should I do if the LED does not change to solid after completing
Option ONE?
Frequently Asked Questions (FAQ)
Q4. How do I restore the extender to its factory default settings?
A. While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Q2. What should I do when the LED is on, but only one band is connected?
A. It depends on your router capabilities. If you are connecting to a dual-band router, but only
2.4GHz or 5GHz LED is on, press the WPS button on the router and on the extender again to
reconnect the other band.
A. You may have entered the incorrect Wi-Fi password of your host network during the
configuration. Please log into the extender's web-based interface to check the password and try
again.
Q1. What do I do if I cannot access the extender’s web management page?
Press the WPS button on your router, and then press the button on the extender.
1
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Option ONE.
WPS
Press
2
If you are connecting the extender to a dual-band router but only or
LED is on, repeat step 1 again to connect the other band.
For more information about using WPS on your router, please refer to the router manufacturer's user guide.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE450 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE450

TP-LINK RE450 User Manual - English - 41 pages

TP-LINK RE450 Quick start guide - English - 2 pages

TP-LINK RE450 Installation Guide - German - 2 pages

TP-LINK RE450 Quick start guide - All languages - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info