664741

TP-LINK RE360 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
©2017 TP-Link
WPS is an easier way to extend your host network. You are recommended to use this way if your host router has a WPS button.
The button might look like one of these: . Otherwise, please use Option ONE.
Option TWO
Quick Setup Using the WPS Button
Both extended networks share the same wireless network names (SSIDs) and passwords as those of your host networks.
Enjoy!
Entertainment Adapter
Tether provides a simple, intuitive way to access and manage your extender
with your iOS or Android devices.
1. Download the Tether app from the App Store or Google Play Store.
2. Ensure your device is wirelessly connected to the extender or to
the host router.
3. Launch the app and start managing your extended network.
TP-Link Tether App
How to
begin?
The extender can be used as a wireless adapter to connect any Ethernet-only
device such as a Blu-ray player, game console, DVR, or smart TV to your Wi-Fi
network.
First, connect the extender to your router using Option ONE or Option TWO.
Then connect your Ethernet-only device to the extender via an Ethernet cable.
Ethernet Connection
Scan to download
Tether
Block unwelcome devicesTurn on/o the LEDs
Modify current settingsSet up the extender
Smart TV
Game Console
Desktop
Router
Plug the extender into a power
outlet next to your router.
Power on
1
Connect
1. Some ISP gateways disable the WPS function by default. If the WPS method fails, please refer to Option ONE.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
2
Press the WPS button on your router, and then press the WPS button on the extender within 2 minutes.
If you are connecting the extender to a dual band router but only the 2.4GHz or 5GHz LED is on, repeat
Step 1 to connect to the other band.
1
2
The Signal LED should change from
blinking to solid on, indicating
successful connection.
If not, please use Option ONE.
Wait until the Power LED is solid on.
Relocate
Plug in the extender about halfway between your router and the
Wi-Fi dead zone. The location you choose must be within the range
of the host network.
1
2
3
Wait until the Signal LED turns solid blue. If not, relocate it closer to
the router to achieve better signal quality.
Extended NetworkHost Network
Blue: Suitable location
Red: Too far away
You may have entered incorrect Wi-Fi passwords for your host networks during the
conguration. Please log in to the extender’s web management page to check the
password and try again.
Reset the extender and go through the conguration again.
Q3. What should I do if the Signal LED doesn’t become solid blue after
completing Option ONE?
If your computer is wirelessly connected, make sure that you have connected to the
extender’s SSID.
If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
Make sure your computer is set to obtain an IP address and DNS server address
automatically.
Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the
web browser and press Enter.
Reset the extender and try again.
Q1. What should I do if I cannot access the extender’s web management
page?
With the extender powered on, use a pin to press the Reset button. All the LEDs should
turn on momentarily, and then release the button.
Q2. How do I reset the extender?
If you have enabled those features of your host router, you may need to disable them
rst, and then follow Option ONE or Option TWO to complete the conguration.
Q4. I have enabled a wireless MAC lter, wireless access control, or access
control list (ACL) on my router. What should I do before conguring the
extender?
For technical support and other information, please visit
http://www.tp-link.com/support
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE360 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE360

TP-LINK RE360 User Manual - English - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info