664745
29
Zoom out
Zoom in
Previous page
1/34
Next page
www.tp-link.com
User’s Manual Wi-Fi Extender+
26
Troubleshooting
Frequently Asked Questions
1. HowdoIrestoremyextender’scongurationtoitsfactorydefaultsettings?
There are two methods to factory reset the Wi-Fi Extender+. Keep in mind that factory resetting the
Wi-Fi Extender+ will erase all of your custom settings (such as network settings, schedules, and
admin account credentials) and return them to an out-of-box conguration.
Via the Reset button
With the Wi-Fi Extender+ powered on, press and hold the Reset button for about 10 seconds, or
until all the Status LED starts to flash amber rapidly, then release the button.
Via the extender’s web interface
Launch a browser and log in at http://www.tplinkrepeater.net. Under the Settings tab, go to
SystemTools>Backup&Restore. Then, click the FACTORY RESTORE button under Factory
Default Restore section.
2. Iforgotmypassword,whatshouldIdo?
There are two types of passwords: Wi-Fi password and admin password that is used to access the
extender’s web interface.
Wi-Fi password
The Wi-Fi password to connect to your extended network is the same as your main (host)
network.
Admin account password
The default Admin account’s username and password are “admin” (all lowercase).
3. WhatshouldIdowhentheStatusLEDisOFF?
Check your network connectivity.
Avoid placing the Wi-Fi Extender+ near potential sources of radio signal interference such as
microwave ovens, cordless phones, baby monitors, and motor-driven appliances.
Soft reset the Wi-Fi Extender+ and repeat the app onboarding process.
Factory reset the Wi-Fi Extender+ and try to add it to your network again.
4. WhatshouldIdoifthe2.4Gand5GLEDskeepflashinggreenorareOFF?
When the 2.4G and 5G LEDs are flashing green, the Wi-Fi Extender+ is in the SoftAP mode, you
need to set up the extender using Kasa or its web-based user interface.
If both of the LEDs are not illuminated, which means the Wi-Fi Extender+ is not connected to
your router, press and hold the Reset button for 5 seconds until the Status, 2.4G, and 5G LEDs
start to flash to initiate the SoftAP mode. Then, launch the Kasa app and add the extender again.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE270K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE270K in the language / languages: English as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE270K

TP-LINK RE270K Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info