772833
53
Zoom out
Zoom in
Previous page
1/61
Next page
50
FAQ
Q1. How to reset the extender to its factory default settings?
With the extender powered on, use a pin to press the Reset button for 1 second. The
extender will reboot.
Log in to the extender’s web management page. Go to Settings > System Tools >
Backup & Restore and click FACTORY RESTORE.
Q2. What should I do if I forget my login password?
If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the extender, click Forgot Password? on the login page and then follow the
instructions to reset it.
Refer to FAQ > Q1 to reset the extender, and then visit http://tplinkrepeater.net to
create a new login password.
Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password
for future logins.
Q3. What should I do if I forget my wireless password?
In Range Extender mode, the extender shares the same wireless passwords as those
of your host networks.
In Access Point mode, please connect your computer to the extender using an Ethernet
cable and follow the steps below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Wireless to retrieve or reset your wireless password.
Q4. What should I do if I can’t access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
If your computer is wirelessly connected, make sure that you have connected to the
extender’s SSID.
If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
Make sure your computer is configured as Obtain an IP address automatically and
Obtain DNS server address automatically.
Verify that http://tplinkrepeater.net is correctly entered in the web browser and press
Enter.
Use the IP address to access the extender. The default IP is 192.168.0.254. If the
extender is connected to the router, you should go to your router’s DHCP client list to
obtain the extender’s current IP address.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK RE230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK RE230 in the language / languages: English as an attachment in your email.

The manual is 6.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK RE230

TP-LINK RE230 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info