714410
114
Zoom out
Zoom in
Previous page
1/138
Next page
108
Channel Width Select the channel width of the EAP device. The available options differ among
different EAPs.
For some EAPs, available options include 20MHz, 40MHz and 20/40MHz.
For other EAPs, available options include 20MHz, 40MHz, 80MHz and
20/40/80MHz.
The 20/40 MHz and 20/40/80MHz channels enable higher data rates but leave
fewer channels available for use by other 2.4GHz and 5GHz devices. When the
radio mode includes 802.11n, we recommend you set the channel bandwidth to
20/40 MHz or 20/40/80MHz to improve the transmission speed.
Channel Select the channel used by the EAP device to improve wireless performance.
The range of available channels is determined by the radio mode and the
country setting. If you select Auto for the channel setting, the EAP device scans
available channels and selects a channel where the least amount of traffic is
detected.
Tx Power (EIRP) Select the Tx Power (Transmit Power) in the 4 options: Low, Medium, High
and Custom. Low, Medium and High are based on the Min. Txpower (Minimum
transmit power) and Max. TxPower (maximum transmit power. It may vary among
different countries and regions).
Low: Min. TxPower + (Max. TxPower-Min. TxPower) * 20% (round off the value)
Medium: Min. TxPower + (Max. TxPower-Min. TxPower) * 60% (round off the
value)
High: Max. TxPower
Custom: Enter a value manually.
5.4.4  Load Balance
By setting the maximum number of clients accessing the EAPs, Load Balance helps to achieve
rational use of network resources.
Select the frequency band (2.4GHz/5GHz) and configure the parameters.
Max Associated
Clients
Enable this function and specify the maximum number of connected clients. While
more clients requesting to connect, the EAP will disconnect those with weaker
signals.
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK Omada OC200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK Omada OC200 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info