Manual TP-LINK Omada EAP115-Wall (page 48 of 104) (English, Polish)

714590

Zoom out

Zoom in

1/104

3. In the AP EDCA Parameters section, configure the AP EDCA ((Enhanced Distributed

Channel Access) parameters. AP EDCA parameters affect traffic flowing from the EAP

device to the client station. The following table detailedly explains these parameters.

The following table detailedly explains these parameters:

Queue Displays the transmission queue. By default, the priority from high to

low is Data 0, Data 1, Data 2, and Data 3. The priority may be changed if

you reset the EDCA parameters.

Data 0 (Voice): Highest priority queue, minimum delay. Timesensitive

data such as VoIP and streaming media are automatically sent to this

queue.

Data 1 (Video): High priority queue, minimum delay. Time-sensitive

video data is automatically sent to this queue.

Data 2 (Best Effort): Medium priority queue, medium throughput and

delay. Most traditional IP data is sent to this queue.

Data 3 (Background): Lowest priority queue, high throughput. Bulk data

that requires maximum throughput and is not time-sensitive is sent to

this queue (FTP data, for example).

Arbitration Inter-

Frame Space

A wait time for data frames. The wait time is measured in slots. Valid

values are from 0 to 15.

Minimum

Contention

Window

A list to the algorithm that determines the initial random backoff wait

time (window) for retry of a transmission.

This value cannot be higher than the value of Maximum Contention

Window.

Maximum

Contention

Window

The upper limit (in milliseconds) for the doubling of the random backoff

value. This doubling continues until either the data frame is sent or the

Maximum Contention Window size is reached.

This value must be higher than the value of Minimum Contention

Window.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK Omada EAP115-Wall in the language / languages: English, Polish as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TP-LINK Omada EAP115-Wall Manual

Product: