635764
33
Zoom out
Zoom in
Previous page
1/58
Next page
M7310
LTE-Advanced Mobile Wi-Fi User Guide
-26-
Wireless Network Name (SSID): SSID is short for Service Set Identification, which helps
you distinguish different wireless networks. The default SSID of this Mobile Wi-Fi is
TP-LINK _XXXX (XXXX stand for the last 4 characters of the MAC address of it.). You can
rename it as your preference, but the value is limited to 32 characters and also it's
case-sensitive (For example, TEST is NOT the same as test). Later on it will display in the
wireless network list searched by your devices if you don’t disable the SSID broadcast.
SSID Broadcast: Select to enable or disable this function. When wireless clients survey
the local area for wireless networks to associate with, they will detect the SSID broadcast
by the Mobile Wi-Fi. If you enable SSID broadcast, the wireless Mobile Wi-Fi will broadcast
its name (SSID) on the air; otherwise, you have to manually type in the SSID and then you
can join its network.
Wireless Band: This field determines the frequency band that the radio will work on. There
are two bands you can choose: 2.4GHz or 5GHz. Please pick up suitable frequency band
according to the policy of local government and your requirements.
Channel: This field determines which operating frequency will be used. If you select "Auto",
then the Mobile Wi-Fi will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Wireless Mode: This field determines which Wi-Fi network protocol will be used. Without
special demands, you are recommended to select 11bgn mixed as Wi-Fi mode. To seek
the optimal performance of Wi-Fi hotspot, you are recommended to select the mode that
corresponds with your wireless NIC, for instance, if your NIC supports IEEE802.11n
specification, 11n only is recommended.
Wireless Security: You are provided two modes of security here: Unsecured and
WPA-PSK/WPA2-PSK. WPA-PSK/WPA2-PSK is the WPA-PSK/WPA2-PSK
authentication type based on pre-shared passphrase. It's easy to set and secure to use. So
it's perfect for SOHO users.
Wireless Password: You can enter 8~63 ASCII characters (case sensitive) or 64
hexadecimal characters (case insensitive) as your wireless password.
Display password on screen - If enabled, the password of your Wi-Fi will be displayed on
the screen of your mobile Wi-Fi.
Click Save to save your settings.
4.4.2.2. WPS
You can configure the WPS function on this page. The WPS function takes effect only when
SSID Broadcast is enabled.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK M7310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK M7310 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info