772888
2
Zoom out
Zoom in
Previous page
1/2
Next page
Button Explanations
LED Status
Specications
Safety Notice
Smart Wi-Fi Dimmer Switch
Quick Start Guide
Before installing, servicing or removing the switch, read and
follow all safety precautions including the following:
• CAUTION – Risk of Electric Shock – More than one
disconnect switch may be required to de-energize the
equipment before servicing. A circuit breaker which
disconnects the Line and Neutral conductor simultaneously
is suitable. Ensure power is o at the circuit breaker before
removing or installing any switch. Use a non-contact voltage
tester to ensure the power is o.
• The Smart Switch must be installed and used in accordance
with the National Electric Code (NEC) or your local electrical
code. If you are unfamiliar with these codes and
requirements, or are uncomfortable performing the
installation, consult a qualied electrician.
• Do not install the Smart Switch with wet hands or when
standing on wet or damp surfaces.
• Install only in a suitable UL Listed outlet box (suitable
dimensions: H > 2.95 in./75 mm, W > 1.81 in./46 mm,
D > 2 in./51 mm).
• Tighten terminal screws to 13 lbf-in.
7106509177 REV1.0.0 ©2021 TP-Link
Rating: 120V~ 60Hz
Load: 300W Incandescent, 150W LED
Operation temperature: 0~40
Need some help?
?
Visit www.tp-link.com/support
for technical support, user guides, FAQs,
warranty & more
Starting up.Flashing red
Flashing amber
Flashing green
White
Breathing white
Solid red
Stay green for 30s
Solid amber
Flashing amber & green
Your phone is connected
to the switch.
Connecting to Wi-Fi.
Ready for setup.
The switch is being reset to
factory default settings.
Light fixture is off.
The switch will be auto off.
Disconnected from Wi-Fi.
Connected to Wi-Fi.
*Images may dier from your actual product.
Restart
Reset
Press and hold for about 5s to reset
your switch with configuration saved.
Press to restart your switch.
Decrease or increase the brightness.
Press and hold for about 10s to restore
your switch to factory default settings.
/
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK ES20M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK ES20M in the language / languages: English as an attachment in your email.

The manual is 0.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK ES20M

TP-LINK ES20M User Manual - English - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info