772854
17
Zoom out
Zoom in
Previous page
1/83
Next page
14
Chapter 4 Congure Internet Connections
4. 1. Set Up an IPv6 Connection
If your ISP has provided a line that supports IPv6 connection as well as some detailed
IPv6 parameters, you can manually set up an IPv6 connection.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an internet connection by referring to Quick Start before
setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with the password you set for the router.
3. Go to Advanced > Network > IPv6 LAN Settings. In the DHCPv6 Server section,
configure the following parameters provided by your ISP.
DHCPv6 Server: Select the checkbox to enable DHCPv6 server.
Starting IP Address: Enter a value for the DHCPv6 server to start with when issuing IP
addresses.
Number of Addresses: Enter a value between 0-255 for DHCPv6 server preference.
The default value is 255.
Address Lease Time: The Address Lease Time is the amount of time in which a network
user will be allowed connection to the modem router with their current dynamic
IP address. Enter the amount of time, in seconds, then the user will be assigned
this dynamic IP address. After the dynamic IP address is expired, the user will be
automatically assigned a new dynamic IP address. The default is 3600 seconds.
Rapid Commit: Select the checkbox to enable the prefix fast distribution function.
Unicast: Select the checkbox to enable the unicast function. The default setting is
disabled.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CR1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CR1900 in the language / languages: English as an attachment in your email.

The manual is 5.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info