605840
74
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 7 Management Tab
PoE Passthrough
When enabled, the device allows Power over Ethernet (PoE) power to pass from
LAN0 port to LAN1 port. Enable it if you want to supply power to other passive
PoE device by LAN1.
Ping Watch Dog
Ping Watch Dog sets the device to continuously ping a user-defined IP address (it can be the Internet
gateway, for example) to check the network connectivity. If there is a connection failure then the device
will automatically reboot.
Ping Watch Dog is dedicated to continuously monitoring the connectivity to a specific host using the Ping
tool. The Ping tool sends ICMP echo request packets to the target host and listens for ICMP echo response.
If the defined number of replies is not received, the tool reboots the device.
Ping Watch Dog Check the Enable box to use the function of Ping Watch Dog.
IP Address To Ping
Specify the IP address of the target host to which the Ping Watch Dog Utility will
send ping packets.
Ping Interval
Enter the time interval (in seconds) between two successive ping packets. The
default value is 300 seconds.
Startup Delay
Enter the initial time delay (in seconds) from device startup to the first ICMP echo
requests sent by Ping Watch Dog. The default value is 300 seconds.
The Startup Delay value should be at least 60 seconds as the device’s initialization
takes a considerable amount of time.
Failure Count To Reboot
Enter the fail count of ICMP echo request. If the device sends the specified count
of ICMP echo requests to the host and none of the corresponding ICMP echo
response packets is received, Ping Watch Dog will reboot the device. The default
value is 3.
- 71 -
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info