605840
54
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 5 Network Tab
IPSec Passthrough -
IPSec (Internet Protocol security) is a suite of
protocols f
or ensuring private, secure communications over IP (Internet
Protocol) networks, through the use of cryptographic security services.
Check the box to allow IPSec tunnels to pass through the Device.
DoS Protection
DoS (Denial of Service) Attack is to occupy the network bandwidth maliciously
by the network attackers or the evil programs sending a lot of service requests
to the Host, which incurs an abnormal service or even breakdown of the
network. With DoS Protection function enabled, the device can analyze the
specific fields of the IP packets and distinguish the malicious DoS attack
packets. Upon detecting the packets, the device will discard the illegal packets
directly and limit the transmission rate of the legal packets if the over legal
packets may incur a breakdown of the network. The hosts sending these
packets will be added into the Blocked DoS Host List. The device can defend a
few types of DoS attack such as
ICMP_FLOOD, UDP_FLOOD and
TCP_SYN_FLOOD.
Packets Statistics Interval - Select a value between 5 and 60 seconds from
the drop-
down list. The default value is 10. The value indicates the time
interval of the packets statistics. The result of the statistic is
used for
analysis by ICMP-Flood, UDP Flood and TCP-SYN Flood.
ICMP_FLOOD Attack Filter - Enter a value between 5 and 3600. The
default value is 50. When the current ICMP-FLOOD Packets number is
beyond the set value, the d
evice will start up the blocking function
immediately.
UDP_FLOOD Attack Filter - Enter a value between 5 and 3600. The default
value is 500. When the current UPD-FLOOD Packets number is beyond the
set value, the device will start up the blocking function immediately.
TCP-SYN-FLOOD Attack Filter - Enter a value between 5 and 3600. The
default value is 50. When the current TCP-SYN-FLOOD Packets numbers is
beyond the set value, the Device will start up the blocking function
immediately.
- 51 -
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info