664712
83
Zoom out
Zoom in
Previous page
1/141
Next page
REV1.0.0 1910012079
User Guide
AC2800 WLAN MU-MIMO Telefon DSL Router
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 1. Get to Know Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . .2
1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. Physical Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 1. Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 2. Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. 2. 3. Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2. Connect the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2. 1. Position Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. 2. Connect Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 3. Log In to Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 4. Set Up Internet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. 1. Use Quick Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. 2. Manually Set Up an Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. 3. Test Internet Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. 4. Set Up an IPv6 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. 5. More Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4. 5. 1. Wireless Router Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4. 5. 2. 3G/4G Router Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 5. TP-Link Cloud Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. 1. Register a TP-Link ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. 2. Change Your TP-Link ID Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. 3. Manage the User TP-Link IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. 3. 1. Add an TP-Link ID to Manage the Router . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5. 3. 2. Remove TP-Link ID(s) From Managing the Router . . . . . . . . . . . . . . . . . . 22
5. 4. Manage the Router via TP-Link Tether App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5. 4. 1. Install the Tether App on Your Smartphones or Tablets . . . . . . . . . . . . 23
5. 4. 2. Locally Manage Your Router Using the Tether App . . . . . . . . . . . . . . . . . 23
5. 4. 3. Remotely Manage Your Router Using the Tether App . . . . . . . . . . . . . . 24
Chapter 6. Telephony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6. 1. Connecting the Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. 2. DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. 2. 1. Registering DECT Handset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. 2. 2. Configuring DECT Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6. 3. Entering Telephone Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6. 4. Telephone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6. 4. 1. Telephone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6. 4. 2. Emergency Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6. 5. Telephony Devices Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6. 6. Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6. 7. Calling via Which Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6. 8. Call Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. 8. 1. Do Not Disturb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. 8. 2. Blocking Certain Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6. 8. 3. Prevent from Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6. 9. Forwarding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6. 10. Call Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6. 11. tpPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6. 12. Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 7. Guest Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
7. 1. Create a Network for Guests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
7. 2. Customize Guest Network Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 8. USB Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
8. 1. Access the USB Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8. 1. 1. Access the USB Device Locally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8. 1. 2. Access the USB Device Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
8. 1. 3. Customize the Access Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
8. 2. Media Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
8. 3. Printer Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
8. 4. 3G/4G Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
8. 4. 1. As a Backup Solution for Internet Access . . . . . . . . . . . . . . . . . . . . . . . . . 61
8. 4. 2. As the Only Way to Access the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Chapter 9. Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 10. QoS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
10. 1. Prioritize Internet Traffic with QoS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
10. 2. Update the Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Chapter 11. Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
11. 1. Firewall & DoS Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
11. 2. Service Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
11. 3. Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
11. 4. IP & MAC Binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Chapter 12. NAT Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
12. 1. Translate Address and Port by ALG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
12. 2. Share Local Resources in the Internet by Virtual Server. . . . . . . . . . . . . . . . . . . . . . 81
12. 3. Open Ports Dynamically by Port Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
12. 4. Make Applications Free from Port Restriction by DMZ . . . . . . . . . . . . . . . . . . . . . . . 83
12. 5. Make Xbox Online Games Run Smoothly by UPnP . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Chapter 13. VPN Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
13. 1. Use OpenVPN to Access Your Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
13. 2. Use PPTP VPN to Access Your Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
13. 3. Use IPSec VPN to Access Your Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Chapter 14. Specify Your Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 95
14. 1. LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
14. 1. 1. Change the LAN IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
14. 1. 2. Use the Modem Router as a DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . 97
14. 1. 3. Reserve LAN IP Addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
14. 2. IPv6 LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
14. 2. 1. Configure the RADVD Address Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
14. 2. 2. Configure the DHCPv6 Server Address Type . . . . . . . . . . . . . . . . . . . . . . 99
14. 3. Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
14. 3. 1. Specify Basic Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
14. 3. 2. Use WPS for Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
14. 3. 3. Schedule Your Wireless Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
14. 3. 4. View Wireless Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
14. 3. 5. Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
14. 4. Set Up a Dynamic DNS Service Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
14. 5. Interface Grouping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
14. 6. Create Static Routes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
14. 7. Set Up the IPv6 Tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
14. 7. 1. Use the Public IPv6 Tunnel Service-6to4 . . . . . . . . . . . . . . . . . . . . . . . . .111
14. 7. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP. . . . .112
Chapter 15. Administrate Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
15. 1. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
15. 2. Control LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
15. 3. Update the Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
15. 3. 1. Online Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
15. 3. 2. Local Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
15. 4. Back up and Restore Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
15. 5. Change the Administrator Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
15. 6. Local Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
15. 7. Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
15. 8. System Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
15. 9. Monitor the Internet Traffic Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
15. 10. CWMP Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
15. 11. SNMP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
1
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation Guide
provides instructions for quick internet setup, while this guide contains details of each
function and demonstrates how to configure them in typical scenarios.
When using this guide, please notice that features of the router may vary slightly
depending on the model and software version you have, and on your location, language,
and internet service provider. All images, parameters and descriptions documented in
this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention
Description
Underline
Hyperlinks are in teal and underlined. You can click to redirect to a website
or a specific section.
Teal
Key information appears in teal, including management page text such as
menus, items, buttons and so on.
>
The menu structures to show the path to load the corresponding page. For
example, Advanced > Wireless > MAC Filtering
means the MAC Filtering
function page is under the Wireless menu that is located in the Advanced
tab.
Note:
Ignoring this type of note might result in a malfunction or damage to the
device.
Tips:
Indicates important information that helps you make better use of your
device.
Symbols on
the web page
click to edit the corresponding entry.
click to delete the corresponding entry.
click to enable or disable the corresponding entry.
click to view more information about items on the page.
More Info
The latest firmware and management app are available from Download Center at
http://www.tp-link.com/support.
The Quick Installation Guide (QIG) can be found where you find this guide or inside the
product package.
Specifications can be found on the product page at http://www.tp-link.com.
A Technical Support Forum is provided for you to discuss our products at
http://forum.tp-link.com.
Our Technical Support contact information can be found at the Contact Technical
Support page at http://www.tp-link.com/support.
Chapter 1
Get to Know Your Modem
Router
This chapter introduces what the modem router can do and shows its main features
and appearance.
It contains the following sections:
Product Overview
Physical Appearance
3
Chapter 1
Get to Know Your Modem Router
1. 1. Product Overview
TP-Link’s Modem Router is a combined wired/wireless network connection device
with integrated wireless router and DSL modem, reducing hassle of configuration and
saving space.
With DSL, WAN, and USB ports, the modem router is compatible with DSL connections,
fiber/cable access and 3G/4G USB dongles.
With Ethernet ports and antennas, the modem router provides wired and wireless
access for multiple computers and mobile devices.
With various features and functions, the modem router is the perfect hub of your home
or business network.
With telephony feature, the modem router allows you to call via the internet.
1. 2. Physical Appearance
1. 2. 1. Top Panel
The modem router’s LEDs are located on the top panel (View from top to bottom). You
can check the modem router’s working status by following the LED Explanation table.
LED On/Off
4
Chapter 1
Get to Know Your Modem Router
LED Explanation
Name Status
Indication
Power
On System initialization is complete.
Flashing
The system is initializing or the firmware is being
upgraded. Do not disconnect or power off the modem
router.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
DSL
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
Off
DSL synchronization failed. Please refer to Note 1 for
troubleshooting.
Internet
White Internet service is available.
Orange
Internet connection is correct but internet service is
unavailable. Please refer to Note 2 for troubleshooting.
Off
Internet connection is incorrect, DSL synchronization
failed, or the modem router is operating in Bridge mode.
Please refer to Note 3 for troubleshooting.
Wireless 2.4GHz
/
Wireless 5GHz
On The wireless 2.4GHz/5GHz band is working properly.
Flashing WPS connection is in progress (about 2 minutes).
Off The wireless 2.4GHz/5GHz band is disabled.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
USB
On The USB device is ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
Phone
On The phone is off-hook or DECT handset is busy.
Flashing The phone is ringing or DECT handset is registering.
Off The phone is on-hook.
Note:
1. If the DSL LED is off, please check your internet connection first. Refer to Connect Your Modem Router for more information
about how to make internet connection correctly. If you have already made a right connection, please contact your ISP to make
sure your internet service is available now.
2. If the Internet LED is orange, please check your internet configuration. You may need to check this part of information with your
ISP and make sure everything have been input correctly.
3. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please refer to Note 1. If your DSL LED is ON,
reconnect your modem router correctly by referring to related guide.
4. Turn on or off the LEDs by pressing the LED On/Off button on the top panel.
5
Chapter 1
Get to Know Your Modem Router
1. 2. 2. Back Panel
The modem router’s back panel shows the connection ports, buttons and antennas.
Refer to the following for detailed instructions.
Item
Description
FON1/FON2
For connecting your analog phone to the modem router. Connect your
analog phones to the TAE ports on the side panel or RJ11 ports on the
back panel. Note that you can only connect to two ports (one to a FON1
and the other to a FON2) at most.
DSL
For connecting the modem router to the internet. Connect the port to
the splitter or directly connect the port to the phone jack via a phone
cable. For details, please refer to Connect Your Modem Router.
LAN1, LAN2, LAN3,
LAN4/WAN
For connecting the modem router to your PC or other Ethernet network
devices. In wireless router mode, the LAN4/WAN port is used for
connecting to a Cable/FTTH/VDSL/ADSL device.
Reset
Press and hold down for 8 seconds to reset the modem router into
factory default settings.
Power On/Off The switch for the power. Press it to power on or off the modem router.
Power
For connecting the modem router to power socket via the provided
power adapter.
Antennas
Used for wireless operation and data transmit. Upright them for the
best Wi-Fi performance.
1. 2. 3. Side Panel
6
Chapter 1
Get to Know Your Modem Router
The modem router’s side panel shows ports and buttons. Refer to the following for
detailed instructions.
Item
Description
WPS Press to start a WPS synchronization.
WLAN Press to turn both 2.4GHz and 5GHz Wi-Fi on or off.
DECT
Press and hold for about 3 seconds until the Phone LED flashes to
register your DECT handset.
Press briefly to page your registered DECT handsets.
USB1/USB2 For connecting to a USB storage device or a USB printer.
FON1/FON2
For connecting your analog phone to the modem router. Connect your
analog phones to the TAE ports on the side panel or RJ11 ports on the
back panel. Note that you can only connect to two ports (one to a FON1
and the other to a FON2) at most.
Chapter 2
Connect the Hardware
This chapter contains the following sections:
Position Your Modem Router
Connect Your Modem Router
8
Chapter 2
Connect the Hardware
2. 1. Position Your Modem Router
With the modem router, you can access your network from anywhere within the
wireless network coverage. However, the wireless signal strength and coverage varies
depending on the actual environment where your modem router is in. Many obstacles
may limit the range of the wireless signal, for example, concrete structures, thick walls.
For your security and best Wi-Fi performance, please:
Do Not locate the modem router in the place where it will be exposed to moisture or
excessive heat.
Keep away from the strong electromagnetic radiation and the devices of
electromagnetic sensitive.
Place the modem router in a location where it can be connected to the various devices
as well as to a power source.
Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
Tips: The modem router can be placed on a shelf or desktop.
2. 2. Connect Your Modem Router
Follow the steps below to connect your modem router.
1. Connect the DSL line and power adapter. The electrical outlet shall be installed
near the device and shall be easily accessible.
9
Chapter 2
Connect the Hardware
Modem Router
TAE Socket
Power Adapter
Power Socket
Turn on the modem router.
Install the antennas.
Connect the TAE-RJ45 adapter to the modem router
using an RJ11-to-RJ45 cable, then connect the
TAE-RJ45 adapter to the TAE socket.
2
3
Wait for about 1 minute until the DSL LED is solid
on.
4
FON 1 FON 2
N F N
1
2. Connect your computer to the modem router.
Method 1: Wired
Connect your computer’s Ethernet port to the LAN port on the modem router via the
Ethernet cable.
LAN
Method 2: Wirelessly
Use the default SSID (Wireless Network Name) and Wireless Password printed on
the included Wi-Fi Info Card or on the product label of the modem router to connect
wirelessly.
10
Chapter 2
Connect the Hardware
Computer Smart Device
Connections are available
Wireless Network Connection
Connect automatically Connect
TP-LINK_XXXX
TP-LINK_XXXX_5G
Wi-Fi
Wi-Fi
TP-LINK_XXXX
TP-LINK_XXXX_5G
CHOOSE A NETWORK...
Other...
< Settings
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device’s screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The WPS LED flashes for about two minutes during the WPS process.
4 ) When the WPS LED is on, the client device has successfully connected to the
modem router.
Chapter 3
Log In to Your Modem
Router
12
Chapter 3
Log In to Your Modem Router
With a web management page, it is easy to configure and manage the modem router.
The web management page can be used on any Windows, Macintosh or UNIX OS with a
Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log in to your modem router.
1. If the TCP/IP Protocol on your computer is set to the static (fixed) IP address,
you need to change it to obtain an IP address automatically. Refer to Appendix:
Troubleshooting to configure your computer.
2. Launch a web browser and go to http://tplinkmodem.net or http://192.168.1.1.
Create a strong password and click Los geht’s to log in.
Note:
1. If you have registered a TP-Link ID and bind your cloud router to it, the login password you created here should be ineffective.
Please log in to the cloud router using your TP-Link ID.
2. You can change the display language of the product according to your needs. In this guide we use English as the display
language of the product to illustrate the features.
Chapter 4
Set Up Internet
Connections
This chapter introduces how to connect your modem router to the internet. The
modem router is equipped with a web-based Quick Setup wizard. It has many ISP
information built in, automates many of the steps and verifies that those steps have
been successfully completed. Furthermore, you can also set up an IPv6 connection if
your ISP provides IPv6 service.
This chapter includes the following sections:
Use Quick Setup Wizard
Manually Set Up an Internet Connection
Test Internet Connectivity
Set Up an IPv6 Connection
More Operation Modes
14
Chapter 4
Set Up Internet Connections
4. 1. Use Quick Setup Wizard
1. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
2. Click Quick Setup on the top of the page. Then follow the step-by-step instructions
to connect your router to the internet and configure the VoIP parameters.
3. To enjoy a more complete service from TP-Link (remote management, TP-Link
DDNS, etc.), log in with your TP-Link ID or click Register Now to get one. Then follow
the instructions to bind the modem router to your TP-Link ID.
Note:
1. To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud section.
2. If you do not want to register a TP-Link ID for now, you may click Log In Later to proceed.
3. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process, all your
wireless devices must use the new SSID and password to connect to the router.
4. 2. Manually Set Up an Internet Connection
1. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
2. Go to Basic > Internet page. Select your ISP, and related information will be
automatically filled in. For some ISPs, you may need to manually specify some
information provided. If you can’t find your ISP in the ISP List, select Other and then
enter the information provided by your ISP.
15
Chapter 4
Set Up Internet Connections
3. Click Save to make the settings effective, and you can refer to Test Internet
Connectivity to test the internet connection.
Tips: You can view and edit all internet connections on Advanced > Network > Internet page.
4. 3. Test Internet Connectivity
After manually setting up the internet connection, you need to test the internet
connectivity. The modem router provides a diagnostic tool to help you locate the
malfunction.
1. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
2. Go to Advanced > System Tools > Diagnostics page.
16
Chapter 4
Set Up Internet Connections
3. Click Start to test the internet connectivity and you will see the test result in the
gray box.
4. 4. Set Up an IPv6 Connection
If your ISP has provided a DSL line that supports IPv6 connection as well as some
detailed IPv6 parameters, you can manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to Set Up the IPv6 Tunnel.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an IPv4 connection by using Quick Setup wizard or
manually before setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
3. Go to Advanced > Network > Internet page.
4. Select your WAN Interface Name (Status should be Connected) and click the
(Edit) icon.
17
Chapter 4
Set Up Internet Connections
5. Scroll down the page, enable IPv6, and configure the IPv6 parameters.
Addressing Type: Consult your ISP for the addressing type, DHCPv6 or SLAAC.
SLAAC is the most commonly used addressing type.
IPv6 Gateway: Keep the default setting as Current Connection.
Note: If your ISP has provided the IPv6 address, click Advanced to reveal more settings. Check to use IPv6
specified by ISP and enter the parameters provided by your ISP.
6. Click OK to make the settings effective. Now IPv6 service is available for your
network.
4. 5. More Operation Modes
The modem router supports two more operation modes: Wireless Router mode and
3G/4G Router mode. You can change the mode according to your needs.
4. 5. 1. Wireless Router Mode
If you already have a modem or your internet comes via an Ethernet jack on the wall, you
can set up the modem router as a regular wireless router to share the internet.
1. Find the WAN port (labeled as LAN4/WAN) on the modem router, and connect it
to your existing modem or the Ethernet jack on the wall. Then connect the power
adapter and turn on the modem router. If you connect an existing modem, reboot it
to get the modem router connected to the internet.
2. Connect your computer to the modem router. For details, refer to Connect Your
Modem Router.
3. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
4. Go to Advanced > Operation Mode, select the Wireless Router Mode, and click
Save. The modem router will reboot.
18
Chapter 4
Set Up Internet Connections
5. Go to Basic > Internet, select the Connection Type, and enter the information
provided by your ISP.
6. Click Save to make the settings effective.
Tips:
1. You can view and edit all internet connections on Advanced > Network > Internet page.
2. In the Wireless Router Mode, you can also permit IPv6 connection by setting up an IPv6 connection or the IPv6 tunnel just as in
the DSL Modem Router Mode. For details, refer to Set Up an IPv6 Connection and Set Up the IPv6 Tunnel.
4. 5. 2. 3G/4G Router Mode
The modem router can be used as a 3G/4G wireless router if you have a 3G/4G USB
modem. There are two ways to use your 3G/4G network:
As a backup solution for internet access
Use this way if you have set up an internet connection successfully and want to use the
3G/4G network as a backup network. Your modem router will be directly connected to
the 3G/4G network when the original network service fails. For detailed instructions,
refer to As a Backup Solution for Internet Access.
As the only way to access the internet
Use this way if wired internet access is not available and you can only use the 3G/4G
network to access the internet. For detailed instructions, refer to As the Only Way to
Access the Internet.
Tips:
In the 3G/4G Router Mode, you can also permit IPv6 connection by setting up the IPv6 tunnel just as in the DSL Modem
Router Mode. For details, refer to Set Up the IPv6 Tunnel.
Chapter 5
TP-Link Cloud Service
TP-Link Cloud service provides a better way to manage your cloud devices. Log in to
your router with a TP-Link ID, and you can easily monitor and manage your home network
when you are out and about via the Tether app on your smartphone or tablet. To ensure
that your router stays new and gets better over time, the TP-Link Cloud will notify you
when an important firmware upgrade is available. Surely you can also manage multiple
TP-Link Cloud devices with a single TP-Link ID.
This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs
to manage your router, and the Tether app with which you can manage your home
network no matter where you may find yourself.
It contains the following sections:
Register a TP-Link ID
Change Your TP-Link ID Information
Manage the User TP-Link IDs
Manage the Router via TP-Link Tether App
20
Chapter 5
TP-Link Cloud Service
5. 1. Register a TP-Link ID
If you have skipped the registration during the Quick Setup process, you can
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Basic > TP-Link Cloud.
3. Click Register Now and follow the instructions to register a TP-Link ID.
4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The
first-time login TP-Link ID will be bound automatically to your cloud router as an
Admin.
Note:
Once the router is bound to your TP-Link ID, you need to log in to the router with the TP-Link ID.
The TP-Link ID also can be registered via the TP-Link Tether app. Please refer to Install the Tether App on Your
Smartphones or Tablets to install the app. Launch the app, tap in the top-left corner of the screen and tap Login,
and then click New User to register a new one.
If you want to unbind the admin TP-Link ID from your router, please go to Basic > TP-Link Cloud, click Unbind in the
Device Information section.
5. 2. Change Your TP-Link ID Information
Follow the steps below to change your email address and password of your TP-Link ID
as needed.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Account Information section.
¾ Change your email address
1. Click
behind the Email.
2. Enter the password of your TP-Link ID, then the new email address. And click Save.
21
Chapter 5
TP-Link Cloud Service
¾ Change your password
1. Click
behind the Password.
2. Enter the current password, then a new password twice. And click Save.
5. 3. Manage the User TP-Link IDs
The first-time login TP-Link ID will be bound automatically to your router as an Admin
account. An admin account can add or remove other TP-Link IDs to the same router
as Users. Admin account and User accounts both can monitor and manage the router
locally or remotely, except that user accounts cannot:
Reset the router to its factory default settings from the web management page or the
Tether app.
22
Chapter 5
TP-Link Cloud Service
Add/remove other TP-Link IDs to/from the router.
5. 3. 1. Add an TP-Link ID to Manage the Router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Click
, enter another TP-Link ID as needed and click Save.
Note:
If you need another TP-Link ID, please refer to Install the Tether App on Your Smartphones or Tablets to install the app.
Launch the app, tap in the top-left corner of the screen and tap Login, and then click New User to register a new one.
4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.
5. 3. 2. Remove TP-Link ID(s) From Managing the Router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Check the box(es) of the TP-Link ID(s) you want to remove and click Unbind.
23
Chapter 5
TP-Link Cloud Service
5. 4. Manage the Router via TP-Link Tether App
5. 4. 1. Install the Tether App on Your Smartphones or Tablets
The Tether app runs on iOS and Android devices like smartphones and tablets.
Open the Apple App Store or Google Play and search the key word “TP-Link Tether or
simply scan the QR code to download and install the app.
OR
5. 4. 2. Locally Manage Your Router Using the Tether App
1. Connect your device to the router’s wireless network.
2. Launch the Tether app, select the model of your router and log in with your TP-Link ID
or the password your set for the router.
3. On the home page, you can check your internet status and connected devices, or tap
to manage your router locally as needed.
24
Chapter 5
TP-Link Cloud Service
5. 4. 3. Remotely Manage Your Router Using the Tether App
¾ To remotely access your router on the Tether app, you need the following:
TP-Link Tether app with latest version: Refer to Install the Tether App on Your
Smartphones or Tablets to install the Tether app, or update the installed one to its
latest version.
TP-Link Cloud router with the latest firmware: Refer to Update the Firmware to update
your router with the latest firmware version.
The TP-Link ID bound to your router: If you don’t have a TP-Link ID, refer to Register
a TP-Link ID to register one.
Internet Access: Make sure your smartphone can access the internet whether
through the mobile network or a Wi-Fi network.
¾ To remotely access your router from your smart devices:
1. Launch the Tether app. Tap
in the top-left corner of the screen and tap Login.
2. Log in to the App using the email address and the password of your TP-Link ID.
3. Select the model of your router from the My Cloud Device list.
4. On the home page, you can check your internet status and connected devices, or tap
to manage your router remotely as needed.
Chapter 6
Telephony
This chapter guides you on how to make telephone calls via internet.
Connecting the Telephone
DECT
Entering Telephone Information
Telephone Book
Telephony Devices Management
Call Log
Calling via Which Number
Call Blocks
Forwarding Calls
Call Through
tpPhone
Voice Mail
26
Chapter 6
Telephony
6. 1. Connecting the Telephone
Connect your telephone to the TAE ports on the side panel or RJ11 ports on the back
panel. Please note that you can only connect to two ports (one to a Phone 1 and the
other to a Phone 2) at most.
RJ-11
TAE
FON 1 FON 2
6. 2. DECT
The modem router is integrated with DECT (Digital Enhanced Cordless
Telecommunications) function. With this function enabled, you can register your
cordless phone on the modem router and make calls via internet.
6. 2. 1. Registering DECT Handset
There are two ways to register your DECT handset.
Method 1: Via DECT Button
1. Set your DECT handset in the registration mode, and then press and hold the DECT
button on the DSL router for about 3 seconds until the Phone LED
flashes.
DECT
DECT
USB 1DECTWLANWPS
USB 2
Within 1 minute
Press for 3 seconds
Blinking
27
Chapter 6
Telephony
2. Enter the PIN (Default: 0000) on the DECT handset if required.
Notes:
1. Up to six DECT handsets can be registered on the modem router.
2. If you press the DECT button for more than 4 seconds, and the Phone LED still does not light, release the button and try again.
Method 2: Via Web Management Interface
Follow the steps below to register:
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Telephony > Telephony Devices to open the registration page.
3. Click Register New DECT Handset and follow instructions on the page to register
your DECT handset.
6. 2. 2. Configuring DECT Settings
Configure DECT settings on the web management page of the modem router.
Follow the steps below to configure:
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Telephony > DECT, and you will see the following screen.
28
Chapter 6
Telephony
3. Enable DECT.
4. The PIN code is needed when registering your cordless phone. The default is 0000.
Change it by entering a new one.
5. Reduce DECT field strength: Check the box to enable this function. In this mode,
base transmit power will be decreased. Then the DECT Handset will have signal
within a small distance.
6. Eco DECT: Only when all handsets support Eco Mode, will it take effect. In this
mode, if all the handsets standby for more than one minutes, DECT Base and
DECT Handsets would be in Eco Mode and do not emit any signal. It will wake up
automatically when there is a call.
7. Security: Check the box if you want the DECT/CAT-iq encrypt security to take effect.
8. Click Save to make the settings effective.
6. 3. Entering Telephone Information
Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Telephony > Telephone Numbers to open the configuration page.
3. In the Telephone Numbers section, click Add.
29
Chapter 6
Telephony
4. Choose your Telephony Provider and enter the necessary information as required.
If your telephony provider is not listed here, choose Other and enter the information
as required.
Phone Number: The number you use to dial and answer.
Registrar Address: Usually a domain name, if not, an IP address.
Authentication ID and Password: Not necessary information, but if you have, fill
them in.
Area Code: The area code of your city or region.
Advanced: Click to have more configuration.
30
Chapter 6
Telephony
5. In the Area Code section, enable this function and enter the area code of your city
or region. This can spare you the trouble of including the area code each time you
make a local call over the internet.
6. Click Save to make the settings effective.
To have more configuration on telephony settings
Click Advanced in the Advanced Settings section to configure more telephony settings.
Bound Interface: Bound Interface decides where to send/receive the VoIP traffic. An
easy way to select the interface is to check the location of the SIP (Session Initiation
Protocol) server. If it locates somewhere on the internet then select Any_WAN. If it is on
the local network, select LAN.
Locale Selection: Select a country where you are located. The modem router is
embedded with some default parameters according to different countries such as ring
tones. The default country is Germany.
DSCP for SIP/RTP: DSCP (Differentiated Services Code Point) is the first 6 bits in
the ToS byte. DSCP marking allows users to assign specific application traffic to be
executed in priority by the next Router based on the DSCP value. Select DSCP for the
SIP (Session Initiation Protocol) and RTP (Real-time Transport Protocol) respectively. If
you are unsure, please always keep the default value.
DTMF Relay Setting: DTMF is Dual Tone Multi Frequency. Options available are SIP-Info,
RFC2833, and In-band. If you are unsure which one to choose, please always keep the
default value.
31
Chapter 6
Telephony
SIP INFO: If it is selected, the modem router will capture the DTMF tone and transfer it
into SIP form. Then it will be sent to the remote end with SIP message.
RFC2833: If it is selected, the modem router will capture the keypad number you
pressed and transfer it into digital form then send to the other side; the receiver will
generate the tone according to the digital form it receives. This function is very useful
when the network traffic congestion occurs and it still can remain the accuracy of
DTMF tone.
In-band: If it is selected, the modem router will send the DTMF tone as audio directly
when you press the keypad on the phone.
Registry Expiration Time: Expiration time for the registration message sending.
Registration Retry Interval: Set the time duration for your SIP Registrar server to keep
your registration record. Before the time expires, the Modem Router will send another
register request to SIP Registrar again. If you are unsure of it, please always keep the
default value.
“No answer“ Time: Set a time period, after which the caller is told that the call is not
answered and he or she can leave a message if the voice mail function is enabled.
T 38 support: Select the checkbox to enable this function. T 38 specifies a protocol for
transmitting a fax across IP network in real time. It allows the transfer of fax documents
in real-time between two standard Group 3 facsimile terminals over the internet or other
networks using IP protocols. It will only function when both sites support this feature
and are enabled.
End With ’#’: Choose whether to use “#” as the end signal of your dialing or not.
When the Status column change to
, your telephone information is successfully
registered. At this time, you can pick up your phone, dial the number, and call via internet!
6. 4. Telephone Book
You can store all contacts on your modem router, have a telephone book, set speed dial
number for some contacts and enable emergency calls.
6. 4. 1. Telephone Book
Follow the steps below to have a telephone book on the modem router.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Telephony > Telephone Book. Click Add to enter a new contact’s
information.
32
Chapter 6
Telephony
3. You can set speed dial number for certain numbers. Speed dial function allows you
to reach the desired party by dialing the reduced number of keys rather than a long
phone number.
4. Click OK to save the settings.
6. 4. 2. Emergency Calls
Make my telephone automatically call a specific contact when
the handset is picked up but no operation is done within a period
of time. In this way the old, the kids, the patient or the pregnant
in house are able to send signals for help when emergencies
occur.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Telephone Book.
I want to:
How can I
do that?
33
Chapter 6
Telephony
3. Enable Emergency Number.
4. No Operation Time: Set how long should the telephone wait
before the first number is automatically dialed).
5. Emergency Number: Set the number to be automatically
reached. If more than one number is set, the modem router
will automatically call the next one if the previous is not
answered.
6. Click Save to make the settings effective.
From now on, if you pick up your phone but do not dial within
the no operation time, your phone will automatically call the
emergency number!
6. 5. Telephony Devices Management
Bind different telephony devices with different incoming and
outgoing call numbers, because I have more than one telephone
number and telephony device and I don’t want all telephones
ring at the same time when a number is called.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Telephony Devices.
Done!
I want to:
How can I
do that?
34
Chapter 6
Telephony
3. Click to manage your telephony devices.
4. Device Name: Name the telephone device here.
5. Number for Outgoing Calls: Assign an outgoing number for
this phone.
6. Number for Incoming Calls: Tick the incoming number for
this phone.
7. VAD Support: VAD (Voice Activation Detection) prevents
transmitting the silence packets to consume the bandwidth. It
is also known as Silence Suppression, a software application
that ensures bandwidth when voice activity is activated.
8. Adjust the Speaker Gain slider to control the speaker sound.
9. Adjust the Mic Gain slider to control the speaker sound of
microphone.
35
Chapter 6
Telephony
10. Click OK to make the settings effective.
Now your telephony devices are bound to different incoming
call numbers and outgoing call numbers.
Tips:
Internal number showed on the table are used to make calls between telephony devices connected to the same modem
router. It is preset and cannot be changed.
6. 6. Call Log
Have a call list recording detailed information of incoming calls
and outgoing calls on your modem router.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Call Log.
3. Enable Call Log.
From now on, all calls in and out are recorded here. If you’ve
already had a telephone book, name of the contact would be
shown on the call list.
Tips:
You can enable Push Notification via E-mail for Missed Calls to have e-mail sent to you informing you of missed calls. You
should first go to Advanced > System Tools > Push Service page to enable Push Notification via E-mail, and click to
see the help page for detailed configuration about Push Service.
6. 7. Calling via Which Number
Use different outgoing numbers to call different types of
numbers.
For example, one of my phone number has a relatively low charge
in making long distance calls. I want all long distance calls to be
Done!
I want to:
How can I
do that?
Done!
I want to:
36
Chapter 6
Telephony
dialed via this number.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Call Rules. Click Add to set
call rules.
3. Choose Long Distance in Call Type or Prefix. Prefixes and call
types can vary according to your own circumstances.
4. In Number for Outgoing Calls, choose the number that has
low charge in making long distance calls.
5. Click OK to make the settings effective.
From now on, whenever you are dialing a long distance call, the
call is made via the number you chose in step 5.
Call type can vary according to your circumstances. You can
also set prefix by choosing Calls with Specific Number Prefix in
Call Type or Prefix. When a prefix is set, all numbers with this
prefix is called via the assigned number.
6. 8. Call Blocks
When you do not want calls to be received or dialed, use call block functions. This part
consists of three functions: Do Not Disturb, Block Certain Calls and Prevent from Dialing.
6. 8. 1. Do Not Disturb
Have no telephone ring at a certain period of time.
How can I
do that?
Done!
In addition:
I want to:
37
Chapter 6
Telephony
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > DND & Call Blocking.
3. Enable DND.
4. Set the day(s) when DND is enabled.
5. Click Save to make the settings effective.
Now, within this period of time, no telephone will ring, but all
incoming calls would be recorded in call log. Enjoy your peaceful
time and when you are back, check the call log to see what was
missed.
6. 8. 2. Blocking Certain Calls
Block certain calls, for example, the anonymous calls, or calls
from the annoying salesmen.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > DND & Call Blocking.
3. Click Add under Incoming Calls.
4. Choose to block a specific number or anonymous calls.
How can I
do that?
Done!
I want to:
How can I
do that?
38
Chapter 6
Telephony
5. Click OK to make the settings effective.
From now on, these calls are all automatically blocked by your
modem router.
6. 8. 3. Prevent from Dialing
Prevent my modem router from dialing a certain type of numbers.
For example, it costs a lot to call a mobile phone via my telephone
number, so I don’t want anyone to call a mobile phone using my
number.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > DND & Call Blocking.
3. Click Add under Outgoing Calls.
4. Choose to prevent mobile phone from being dialed. Number
type may vary according to your circumstances.
5. Click OK to make the settings effective.
Now your modem router will prevent all mobile phone from being
dialed.
Number type may vary according to your circumstances. You
can also set prefix by choosing Calls with Specific Number Prefix.
When a prefix is set, all numbers with this prefix is prevented
from being called.
6. 9. Forwarding Calls
Forward some incoming calls to a designated telephone number.
For example, when no one answers the incoming call, it would be
Done!
I want to:
How can I
do that?
Done!
In addition:
I want to:
39
Chapter 6
Telephony
forwarded to my mobile phone so that I won’t miss it.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Call Forwarding. Click Add to
set how calls should be forwarded.
3. Select the incoming calls to be forwarded: Choose to forward
which call or call type.
4. Destination Telephone Number: Set the destination where
calls should be forwarded.
5. Forward the Calls via: Choose via which phone number the
calls will be forwarded.
6. Call Forward Condition: Choose the forwarding type
(Unconditional or No Answer) of the entry.
7. Click OK to make the settings effective.
Now your modem router will automatically forward the call
according to your rule.
How can I
do that?
Done!
40
Chapter 6
Telephony
6. 10. Call Through
Call someone through my telephone number registered on my
modem router.
For example, I am away from home, and want to call a friend who
is aboard. I can call the friend using my mobile phone of course,
but that would cost a huge sum. Meantime, my telephone
number has a low charge in making international calls. So it
would be great if I can call the friend using my mobile phone and
my telephone number. Fortunately, you can do that.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Call Through. Enable Call
Through.
3. Number for Incoming: Select the number you are going to
use to call home via your mobile.
4. Number for Outgoing: Select the number you are going to
use to call your friend who is abroad.
5. If you tick Only Accept Calls from the Numbers below, you
should add numbers that are allowed to use Call Through
function on your modem router. In this example, add your
mobile number.
6. Click Save to make the settings effective.
Now you could follow the process below to call your friend using
your mobile phone and telephone number:
I want to:
How can I
do that?
Done!
41
Chapter 6
Telephony
1. Use your mobile to call the incoming number you selected
in step 4.
2. Put in the PIN code when you hear the tone, remember to
end the PIN with a “#”. Change of the default PIN code is
recommended.
3. Dial the number of your friend.
4. At this time, your friend will receive a call from the outgoing
number your selected in step 5. You can talk to your friend
from your mobile phone.
6. 11. tpPhone
tpPhone is an App allowing you to make and receive calls through VoIP modem router.
Follow the steps below to configure tpPhone settings:
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Telephony > tpPhone and you will see the following screen.
3. Make sure tpPhone is enabled.
4. Note down the default PIN code or set a new one. You need to use this PIN code
when registering tpPhone on the modem router.
5. Click Save to make the settings effective.
You can go to the App Store or Google Play or scan the QR code below to download
tpPhone and start to make phones over the internet.
42
Chapter 6
Telephony
6. 12. Voice Mail
Allow the caller who is not answered to leave a voice mail.
For example, I’m on my vocation, and cannot receive any call at
the moment. If people who called can leave a voice mail, I would
know what was going on when I was absent from home.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Telephony > Voice Mail.
3. Enable Voice Mail.
4. Set the “No answer“ Time. A time period. If the call is not
answered within this time period, the caller can leave a voice
mail.
5. Choose greetings for your Voice Mail. You can record the
greeting by dialing *30 on the keyboard of your telephone.
6. Set how long a voice mail can last at Voice Mail Duration.
I want to:
How can I
do that?
43
Chapter 6
Telephony
7. If you want to access your voice mail remotely, enable
Remote Access Voice Mail and create a new Remote Access
PIN to make this function available. You need to enter this
new PIN when listening to your voice mails remotely.
8. You can enable Push Notification via E-mail for Voice Mails
to have e-mail sent to you informing you of voice mails. You
should first go to Advanced > System Tools > Push Service
page to enable Push Notification via E-mail, and click
to see
the help page for detailed configuration about Push Service.
9. If you have inserted a USB storage device, you can enable
Expand Storage Capacity with USB Storage Device to save
voice mails to your USB storage device after the internal
flash is full.
10. Click Save to make the settings effective.
When a voice mail is recorded, the modem router will display it
in the following table.
There are three ways to listen to these voice mails.
Click
on the table to listen.
Press *20 on the telephone keyboard to listen.
Dial the number of your telephone, press * when you hear the greeting
and follow the voice prompt to enter the Remote Access PIN to listen.
Done!
Chapter 7
Guest Network
This function allows you to provide Wi-Fi access for guests without disclosing your
main network. When you have guests in your house, apartment, or workplace, you can
create a guest network for them. In addition, you can assign network authorities and
bandwidth for guests to ensure network security, privacy, and fluency.
Create a Network for Guests
Customize Guest Network Options
45
Chapter 7
Guest Network
7. 1. Create a Network for Guests
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Guest Network. Locate the Wireless Settings section.
3. Create 2.4GHz and 5GHz guest network according to your needs.
1 ) Enable 2.4GHz Wireless or 5GHz Wireless or enable both according to your
needs.
2 ) Set an easy-to-identify SSID. Don‘t select Hide SSID unless you want your
guests and other people to manually input this SSID for Wi-Fi access.
3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption
values, and set an easy-to-remember password. 2.4GHz and 5GHz guest
networks share the same password.
4. Click Save. Now your guests can access your guest network using the SSID and
password you set!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
7. 2. Customize Guest Network Options
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Guest Network.
46
Chapter 7
Guest Network
3. Assign network authorities and bandwidth according to your needs.
Allow Guests to Access Each Other
Select this checkbox to allow the clients in your guest network to access each
other.
Allow Guests to Access My Local Network
Select this checkbox to allow the clients in your guest network to access your local
network, not just internet access.
Allow Guests to Access My USB Storage Sharing
Select this checkbox to allow the clients in your guest network to access your
router’s USB storage sharing.
Enable QoS for Guest Network
Select this checkbox to set the QoS priority of the guest network. This option is
available only when QoS is enabled on the Advanced > QoS page.
4. Click Save. Now users in your guest network can enjoy only the network authorities
at the priority you assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
Chapter 8
USB Settings
This chapter describes how to use the USB ports to share files, media and a printer
from the USB storage devices over your home network locally, or remotely through the
internet.
The modem router supports USB external flash drives, hard drives and USB printers.
This chapter contains the following sections:
Access the USB Storage Device
Media Sharing
Printer Sharing
3G/4G Settings
48
Chapter 8
USB Settings
8. 1. Access the USB Storage Device
Insert your USB storage device into the modem router’s USB port and then access files
stored there locally or remotely.
Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
If the USB storage device requires using bundled external power, make sure the external power has been
connected.
If you use a USB hard drive, make sure its file system is FAT32 or NTFS. Some modem routers also support
the HFS+ and exFAT file systems.
Before you physically disconnect a USB device from the modem router, safely remove it to avoid data
damage: Go to Advanced > USB Sharing > USB Storage Device and click
.
8. 1. 1. Access the USB Device Locally
Insert your USB storage device into the modem router’s USB port and then refer to the
following table to access files stored on your USB storage device:
Windows
computer
¾ Method 1:
Go to Computer > Network, then click the Network Server Name
(ARCHER_model number by default) in the Computer section. Use
admin for both user name and password to access the USB storage
device.
Note:
1. Operations in different systems are similar. Here we take Windows 7 as an example.
2. Network Server Name can be customized on the web management page.
49
Chapter 8
USB Settings
Windows
computer
¾ Method 2:
Open the Windows Explorer (or go to Computer) and type the server
address \\tplinkmodem.net or ftp://tplinkmodem.net in the address
bar, then press Enter. Use admin for both user name and password
to access the USB storage device.
¾ Method 3:
Open a web browser and type the server address http://
tplinkmodem.net:8082 in the address bar, then press Enter. Use
admin for both user name and password to access the USB storage
device.
Tips:
You can also use the SFTP method to access the USB storage device.
50
Chapter 8
USB Settings
Mac
1 ) Select Go > Connect to Server
2 ) Type the server address smb://tplinkmodem.net
3 ) Click Connect
4 ) When prompted, select the Guest radio box. (If you have set up
a username and a password to deny anonymous access to the
USB disks, you should select the Registered User radio box. To
learn how to set up an account for the access, refer to To Set up
Authentication for Data Security.)
Tips:
You can also use the FTP, http and SFTP methods to access the USB storage device.
Smart
device
Use a third-party app for network files management.
8. 1. 2. Access the USB Device Remotely
You can access your USB disk outside the local area network. For example, you can:
Share photos and other large files with your friends without logging in to (and paying
for) a photo-sharing site or email system.
Get a safe backup for the materials for a presentation.
Remove the files on your camera’s memory card from time to time during the journey.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because
private addresses are not routed on the internet.
Follow the steps below to configure remote access settings.
1. Visit http://tplinkmodem.net, then log in with the password you set for the modem
router.
2. Go to Advanced > USB Sharing > USB Storage Device page.
3. Select the check box to enable FTP (via Internet), or https (via Internet), or SFTP (via
Internet), then click Save.
51
Chapter 8
USB Settings
4. Refer to the following table to access your USB disk remotely.
52
Chapter 8
USB Settings
Windows
computer
¾ Method 1:
1 ) Open the Windows Explorer (or go to Computer, only for
Windows users) or open a web browser.
2 ) Type the server address in the address bar:
Type in ftp://<WAN IP address of the modem router>:<port
number> (such as ftp://59.40.2.243:21). If you have specified
the domain name of the modem router, you can also type
in ftp://<domain name>:<port number> (such as ftp://
MyDomainName:21)
3 ) Press Enter on the keyboard.
4 ) Access with the username and password you set in To Set up
Authentication for Data Security.
¾ Method 2:
Open a web browser and type the server address https://<WAN
IP address of the modem router>:<port number> (such as
https://59.40.2.243:8443) in the address bar, then press Enter. If
you have specified the domain name of the modem router, you
can also type in https://<domain name>:<port number> (such as
https://MyDomainName:8443)
Access with the username and password you set in To Set up
Authentication for Data Security.
You can get the WAN IP address on Advanced > Status page.
¾ Method 3:
Install an SFTP client (e.g. FileZilla) in your computer, configure the
protocol parameters (enter the WAN address of the router and the
username and password you set in To Set up Authentication for
Data Security), and then you can access the USB storage device
via the SFTP client.
Tips:
You can also access the USB disk via a third-party app for network files management, which
can resume broken file transfers.
Smart
device
Use a third-party app for network files management.
Tips:
Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for your modem router.
53
Chapter 8
USB Settings
8. 1. 3. Customize the Access Settings
By default, all the network clients can access all folders on your USB disk. You can
customize your sharing settings by setting a sharing account, sharing specific contents
and setting a new sharing address on the modem router’s web management page.
1. Visit http://tplinkmodem.net, then log in with the account you set for the modem
router.
2. Go to Advanced > USB Sharing > USB Storage Device page.
¾ To Customize the Address of the USB Disk
You can customize the server name and use the name to access your USB disk.
1. On the Sharing Settings part, make sure Network Neighborhood is ticked, and enter
a Network/Media Server Name as you like, such as MyShare, then click Save.
2. Now you can access the USB disk by visiting \\MyShare (for Windows) or smb://
MyShare (for Mac).
¾ To Only Share Specific Content
1. Focus on the Folder Sharing section. Click the button to disable Share All, then click
Add to add a new sharing folder.
54
Chapter 8
USB Settings
2. Select the Volume Name and Folder Path, then enter a Folder Name as you like.
3. Decide the way you share the folder:
Enable Authentication: By default, authentication is enabled for this folder
sharing, and you will be required to log in to the Sharing Account to access the
USB disk. Refer to To Set up Authentication for Data Security to learn more.
Enable Write Access: If you tick this check box, network clients can modify this
folder.
Enable Media Sharing: Tick to enable media sharing for this folder, and you can
view photos, play music and watch movies stored on the USB disk directly from
DLNA-supported devices. Click Media Sharing to learn more.
4. Click OK.
Tips:
The modem router can share eight volumes at most. You can click on the page to detach the corresponding volume
you do not need to share.
55
Chapter 8
USB Settings
¾ To Set up Authentication for Data Security
You can set up authentication for your USB device so that network clients will be
required to enter username and password when accessing the USB disk.
1. On the Sharing Account part, Choose Use Default Account or Use New Account.
The user name and password are both admin for the default account. If your choose
Use New Account, you have to customize the username and a password.
Note:
For Windows users, do not set the sharing username the same as the Windows username. Otherwise, Windows
credential mechanism may cause the following problems:
If the sharing password is also the same as the Windows password, authentication will not work since the Windows will
automatically use its account information for USB access.
If the sharing password is different from the Windows password, the Windows will be unable to remember your credentials
and you will always be required to enter the sharing password for USB access.
2. Specify the folder(s) to enable authentication.
If you want to enable authentication for all folders, simply leave Share All
enabled.
If you want to enable authentication for specific folders, disable Share All and
click Add to specify the folders.
56
Chapter 8
USB Settings
Note:
Due to Windows credential mechanism, you might be unable to access the USB disk after changing Authentication
settings. Please log out from the Windows and try to access again. Or you can change the address of the USB disk by
referring to To Customize the Address of the USB Disk.
8. 2. Media Sharing
The feature of Media Sharing allows you to view photos, play music and watch movies
stored on the USB disk directly from DLNA-supported devices, such as your computer,
pad and PS2/3/4.
1. When your USB disk is inserted into the modem router, your DLNA-supported
devices (such as your computer and pad) connected to the modem router can
detect and play the media files on the USB disks.
2. Refer to the following table for detailed instructions.
57
Chapter 8
USB Settings
Windows
Computer
Go to Computer > Network, then click the Media Server Name (Archer_
model number by default) in the Media Devices section.
Note:
Here we take Windows 7 as an example.
Smart
device
Use a third-party DLNA-supported player.
8. 3. Printer Sharing
The feature of Printer Sharing helps you share a printer with different computers
connected to the modem router.
Note:
Printers unlisted on this page may be incompatible with the modem router:
http://www.tp-link.com/common/compatible/print-server/.
1. Install the Driver of the Printer
Make sure you have installed the driver of the printer on each computer that needs
printer service.
If you do not have the driver, contact the printer manufacturer.
2. Connect the Printer
58
Chapter 8
USB Settings
Cable a printer to the USB port with the USB cable. Wait several seconds until the
USB LED becomes solid on.
3. Install the TP-Link USB Printer Controller Utility
TP-Link USB Printer Controller Utility helps you access the shared printer. Download
and Install the utility on each computer that needs printer service.
1 ) Visit http://www.tp-link.com/app/usb/.
2 ) Click PC Utility (for Windows users) or Mac Utility to download the installation
file and uncompress it.
3 ) Open the uncompressed folder, then click TP-Link USB Printer Controller Setup
(for Windows users) or TP-Link UDS Printer Controller Installer (for Mac users)
to install the utility.
4. Access the Printer
You should set the shared printer as Auto-Connect Printer on every computer that
needs printer service.
1 ) Double-click the icon
on your desktop to launch the USB Printer Controller.
2 ) Highlight the printer you share.
Windows
59
Chapter 8
USB Settings
Mac
3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto-
Connect Printer.
Windows
Mac
4 ) Select the printer you share, then click Apply.
60
Chapter 8
USB Settings
Windows
Mac
5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with
this printer.
61
Chapter 8
USB Settings
Windows
Mac
Tips:
The Print Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan
with TP-Link USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window
will pop up. Finish the scanning process by following on-screen instructions.
8. 4. 3G/4G Settings
The modem router can be used as a 3G/4G wireless router if you have a 3G/4G USB
modem. There are two ways to use your 3G/4G network:
As a backup solution for internet access
As the only way to access the internet
8. 4. 1. As a Backup Solution for Internet Access
Using 3G/4G network as a backup solution for internet access, your modem router will
be directly connected to the 3G/4G network when the original network service fails.
Follow the steps below to set your 3G/4G network as a backup for internet access:
1. Plug your USB modem into the USB port of your modem router.
2. Visit http://tplinkmodem.net, then log in with the password you set for the modem
router.
3. Go to Advanced > USB Settings > 3G/4G Settings, and select the box of Enable
3G/4G as a backup solution for internet access.
62
Chapter 8
USB Settings
4. Verify that your USB 3G/4G Modem is successfully identified.
Note:
The 3G/4G USB modem will not be identified if it is incompatible with the modem router. Find the 3G/4G Compatibility List
on the web page: http://www.tp-link.com/en/comp-list.html. If your USB modem is incompatible, contact our technical
support.
5. Verify that the modem router has correctly recognized your Mobile ISP. When
your Mobile ISP is correct, you have successfully set 3G/4G network as a backup
solution for internet access. Otherwise, select the box of Set the Dial Number, APN,
Username and Password manually and enter the information provided by your
3G/4G network service provider.
6. Click Advanced to have more configurations if needed.
7. Click Save to make the settings effective.
8. 4. 2. As the Only Way to Access the Internet
If you want the 3G/4G network to be your only way to access the internet, follow the
steps below to configure:
1. Plug your USB modem into the USB port of your modem router.
2. Visit http://tplinkmodem.net, then log in with the password you set for the modem
router.
63
Chapter 8
USB Settings
3. Go to Advanced > Operation Mode and choose 3G/4G Router Mode.
4. Click Save and when the modem router is successfully rebooted, the settings will
be effective.
5. Go to Advanced > USB Sharing > 3G/4G Settings.
6. Verify that your USB 3G/4G Modem is successfully detected.
Note:
If your 3G/4G USB modem is incompatible with the modem router, it will not be identified. Find the 3G/4G Compatibility
List on the web page: http://www.tp-link.com/en/comp-list.html. If your USB modem is incompatible, contact our
technical support.
7. Verify that the modem router has correctly recognized your Mobile ISP. When
your Mobile ISP is correct, you can enjoy the internet now! Otherwise, select the
box of Set the Dial Number, APN, Username and Password manually and enter the
information provided by your 3G/4G network service provider.
8. Select the Connection Mode. The default mode is Always on. You can choose
Connect on demand or Connect manually.
If you choose Connect manually, you need to click the Connect or Disconnect
button to manually turn on or off the internet.
If you choose Connect on demand, the network will automatically turn off when
there is no internet request in Max Idle Time, and turn on again when you try to
connect to the internet.
9. Click Advanced to have more configurations if needed.
10. Click Save to make the settings effective.
Chapter 9
Parental Controls
This function allows you to block inappropriate, explicit and malicious websites, and
control access to specified websites at specified time.
65
Chapter 9
Parental Controls
Control what types of websites my children or other home
network users can visit and even the time of day they are allowed
to access the internet.
For example, I want to allow my children’s devices (e.g. a computer
or a tablet) to access only www.tp-link.com and wikipedia.org
from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other
time.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Basic or Advanced > Parental Controls and enable
Parental Controls.
3. Click Add.
I want to:
How can I
do that?
66
Chapter 9
Parental Controls
4. Click Scan, and add the device to be controlled. Or, enter
the Device Name and MAC Address manually.
5. Click the
icon to set the Effective Time. Drag the cursor
over the appropriate cell(s) and click OK.
6. Enter a Description for the entry.
7. Select the checkbox to enable this entry and click OK.
8. Enable Content Restriction and select the restriction mode.
67
Chapter 9
Parental Controls
1 ) In Blacklist mode, the controlled devices cannot access
any websites containing the specified keywords during
the Effective Time period.
2 ) In Whitelist mode, the controlled devices can only access
websites containing the specified keywords during the
Effective Time period.
9. Click Add a New Keyword. You can add many keywords for
both Blacklist and Whitelist. Below are some sample entries
to allow access.
1 ) Enter a web address (e.g. www.tp-link.com) or a web
address keyword (e.g. wikipedia) to only allow or block
access to the websites containing that keyword.
2 ) Specify the domain suffix (eg. .edu or .org) to allow access
only to the websites with that suffix.
10. Enter the keywords or websites you want to add and click
Save.
Now you can control your children’s internet access according
to your needs.
Done!
Chapter 10
QoS
This chapter introduces how to create a QoS (Quality of Service) rule to prioritize
traffic and minimize the impact caused when the connection is under heavy load.
It contains the following sections:
Prioritize Internet Traffic with QoS
Update the Database
69
Chapter 10
QoS
10. 1. Prioritize Internet Traffic with QoS
QoS (Quality of Service) is designed to ensure the efficient operation of the network
when come across network overload or congestion.
Specify priority levels for some devices or applications.
For example, I have several devices that are connected to my
wireless network. I would like to set an intermediate speed on
the internet for my phone.
1. Enable QoS and set bandwidth allocation.
1 ) Visit http://tplinkmodem.net, and log in with the account
you set for the router.
2 ) Go to Advanced > QoS > Settings.
3 ) Select Enable QoS.
4 ) Choose your Line Type.
5 ) Input the maximum upload and download bandwidth
provided by your internet service provider. 1Mbps equals
to 1000Kbps.
6 ) If you want to prioritize the VoIP traffic, select Enable, the
VoIP Priority will be high.
7 ) Click Advanced and drag the scroll bar to set the
bandwidth priority percentage.
8 ) Click Save.
2. Add a middle priority QoS rule for the phone.
I want to:
How can I
do that?
70
Chapter 10
QoS
1 ) Click Add in the Middle Priority area and then select By
Device and click Scan.
2 ) Choose the respective device from the list.
3 ) Click Save.
3. Refer to the steps above to apply other QoS rules if any.
Note:
If you want to delete a QoS rule, click
to remove the responding rule from
the list.
Now QoS is implemented to prioritize internet traffic.
10. 2. Update the Database
This function can help to add or update the applications the router supports. If the
applications you need are not listed in the Application list, you can try to download
the new version and upgrade the database. New database versions are posted at
www.tp-link.com and can be downloaded for free.
1. Download the latest QoS database from our website (www.tp-link.com).
2. Visit http://tplinkmodem.net, and log in with the account you set for the router.
Done!
71
Chapter 10
QoS
3. Go to Advanced > QoS > Database. Click Browse to select the database upgrade
file, and then click Upgrade. Wait until the upgrade is completed and do not operate
during the process.
Chapter 11
Network Security
This chapter guides you on how to protect your home network from unauthorized
users by implementing these three network security functions. You can block or allow
specific client devices to access your wireless network using MAC Filtering, or using
Access Control for wired and wireless networks, or you can prevent ARP spoofing and
ARP attacks by using IP & MAC Binding.
Firewall & DoS Protection
Service Filtering
Access Control
IP & MAC Binding
73
Chapter 11
Network Security
11. 1. Firewall & DoS Protection
The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection
protect the router from cyber attacks.
The SPI Firewall can prevent cyber attacks and validate the traffic that is passing
through the router based on the protocol. This function is enabled by default, and it’s
recommended to keep the default settings.
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests. Follow the steps below to configure DoS Protection.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Security > Firewall & DoS Protection.
3. Enable DoS Protection.
4. Set the level (Low, Middle or High) of protection for ICMP-Flood Attack Filtering,
UDP-Flood Attack Filtering and TCP-Flood Attack Filtering.
ICMP-Flood Attack Filtering - Enable to prevent the ICMP (Internet Control
Message Protocol) flood attack.
UDP-Flood Attack Filtering - Enable to prevent the UDP (User Datagram
Protocol) flood attack.
TCP-Flood Attack Filtering - Enable to prevent the TCP (Transmission Control
Protocol) flood attack.
5. Click Save.
Tips:
1. The level of protection is based on the number of traffic packets. Specify the level at DoS Protection Level
Settings.
74
Chapter 11
Network Security
2. The protection will be triggered immediately when the number of packets exceeds the preset threshold value,
and the vicious host will be displayed in the Blocked DoS Host List.
11. 2. Service Filtering
With Service Filtering, you can prevent certain users from accessing the specified
service, even block internet access completely.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > Security > Service Filtering.
3. Toggle On Service Filtering.
4. Click Add.
75
Chapter 11
Network Security
5. Select a Service Type from the drop-down list and the following four fields will be
auto-populated. Select Custom when your desired service type is not listed, and
enter the information manually.
6. Specify the IP address(es) that this filtering rule will apply to.
7. Click Save.
Note: If you want to disable this entry, click the Bulb icon .
11. 3. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Security > Access Control and enable
Access Control.
I want to:
How can I
do that?
76
Chapter 11
Network Security
3. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist and click Save.
2 ) Select the device(s) to be blocked in the Devices Online
table.
3 ) Click Block above the Devices Online table. The selected
devices will be added to Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select Whitelist and click Save.
2 ) Click Add.
77
Chapter 11
Network Security
3 ) Enter the Device Name and MAC Address (You can copy
and paste the information from Devices Online table if
the device is connected to your network).
4 ) Click OK.
Now you can block or allow specific client devices to access your
network (via wired or wireless) using the Blacklist or Whitelist.
11. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Security > IP & MAC Binding and enable IP
& MAC Binding.
3. Bind your device(s) according to your needs.
To bind the connected device(s)
1 ) Select the device(s) to be bound in the ARP List.
Done!
I want to:
How can I
do that?
78
Chapter 11
Network Security
2 ) Click Bind to add to the Binding List.
To bind the unconnected device
1 ) Click Add.
2 ) Enter the MAC address and IP address that you want to
bind.
3 ) Select the check box to enable the entry and click OK.
Now you don’t need to worry about ARP spoofing and ARP
attacks.
Done!
Chapter 12
NAT Forwarding
Modem router’s NAT (Network Address Translation) feature makes the devices in the
LAN use the same public IP address to communicate in the internet, which protects the
local network by hiding IP addresses of the devices. However, it also brings about the
problem that external host cannot initiatively communicate with the specified device in
the local network.
With forwarding feature the modem router can penetrate the isolation of NAT and
allows the external hosts in the internet to initiatively communicate with the devices in
the local network, thus to realize some special functions.
TP-Link modem router includes four forwarding rules. If two or more rules are set, the
priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and
DMZ.
This chapter contains the following sections:
Translate Address and Port by ALG
Open Ports Dynamically by Port Triggering
Make Applications Free from Port Restriction by DMZ
Make Xbox Online Games Run Smoothly by UPnP
80
Chapter 12
NAT Forwarding
12. 1. Translate Address and Port by ALG
ALG (Application Layer Gateway) allows customized NAT (Network Address Translation)
traversal filters to be plugged into the gateway to support address and port translation
for certain application layer “control/data” protocols: FTP, TFTP, H323 etc. Enabling ALG
is recommended.
Visit http://tplinkmodem.net, and log in with the account you set for the router. Go to
Advanced > NAT Forwarding > ALG.
PPTP Pass-through: If enabled, it allows Point-to-Point sessions to be tunneled
through an IP network and passed through the router.
L2TP Pass-through: If enabled, it allows Layer 2 Point-to-Point sessions to be tunneled
through an IP network and passed through the router.
IPSec Pass-through: If enabled, it allows IPSec (Internet Protocol Security) to
be tunneled through an IP network and passed through the router. IPSec uses
cryptographic security services to ensure private and secure communications over
IP networks.
FTP ALG: If enabled, it allows FTP (File Transfer Protocol) clients and servers to transfer
data via NAT.
TFTP ALG: If enabled, it allows TFTP (Trivial File Transfer Protocol) clients and servers
to transfer data via NAT.
H323 ALG: If enabled, it allows Microsoft NetMeeting clients to communicate via NAT.
SIP ALG: If enabled, it allows clients communicate with SIP (Session Initiation Protocol)
servers via NAT.
81
Chapter 12
NAT Forwarding
RTSP ALG: If enabled, it allows RTSP (Real-Time Stream Protocol) clients and servers
to transfer data via NAT.
12. 2. Share Local Resources in the Internet by Virtual
Server
When you build up a server in the local network and want to share it on the internet,
Virtual Server can realize the service and provide it to the internet users. At the same
time virtual server can keep the local network safe as other services are still invisible
from the internet.
Virtual server can be used for setting up public services in your local network, such as
HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
Share my personal website I’ve built in local network with my
friends through the internet.
For example, the personal website has been built in my home PC
(192.168.1.100). I hope that my friends in the internet can visit
my website in some way. The PC is connected to the modem
router with the WAN IP address 218.18.232.154.
Modem Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1. Assign a static IP address to your PC, for example
192.168.1.100.
2. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
3. Go to Advanced > NAT Forwarding > Virtual Servers, click
Add.
I want to:
How can I
do that?
82
Chapter 12
NAT Forwarding
4. Click Scan, and choose HTTP. The external port, internal port
and protocol will be automatically filled with contents. Enter
the PC’s IP address 192.168.1.100 in the Internal IP field.
5. Click OK to save the settings.
Tips:
1. It is recommended to keep the default settings of Internal Port and Protocol
if you are not clear about which port and protocol to use.
2. If the service you want to use is not in the Service Type, you can enter the
corresponding parameters manually. You should verify the port number
that the service needs.
3. You can add multiple virtual server rules if you want to provide several
services in a modem router. Please note that the External Port cannot be
overlapped.
Users in the internet can enter http://WAN IP (in this example:
http://218.18.232.154) to visit your personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned
dynamically by ISP, it is recommended to apply and register a domain name
for the WAN by DDNS, go to Set Up a Dynamic DNS Service Account for
more information. Then you can use http://domain name to visit the website.
2. If you have changed the default External Port, you should use http://WAN
IP: External Port or http://domain name: External Port to visit the website.
12. 3. Open Ports Dynamically by Port Triggering
Port triggering can specify a triggering port and its corresponding external ports. When
a host in the local network initiates a connection to the triggering port, all the external
ports will be opened for subsequent connections. The modem router can record the IP
Done!
83
Chapter 12
NAT Forwarding
address of the host. When the data from the internet return to the external ports, the
modem router can forward them to the corresponding host. Port triggering is mainly
applied to online games, VoIPs and video players. Common applications include MSN
Gaming Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > NAT Forwarding > Port Triggering and click Add.
3. Click Scan, and select the desired application. The triggering port and protocol, the
external port and protocol will be automatically filled with contents. Here we take
application MSN Gaming Zone as an example.
4. Click OK to save the settings.
Tips:
1. You can add multiple port triggering rules according to your network need.
2. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify
the external ports the application uses first and enter them into External Port field according to the format the page displays.
12. 4. Make Applications Free from Port Restriction
by DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally
exposed to the internet, which can realize the unlimited bidirectional communication
between internal hosts and external hosts. The DMZ host becomes a virtual server with
all ports opened. When you are not clear about which ports to open in some special
84
Chapter 12
NAT Forwarding
applications, like IP camera and database software, you can set the PC to be a DMZ
host.
Note:
DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ
host is totally exposed to the internet, which may bring some potential safety hazard. If DMZ is not in use, please disable
it in time.
Make the home PC join the internet online game without port
restriction.
For example, Due to some port restriction, when playing the
online games, you can login normally but cannot join a team with
other players. To solve this problem, set your PC as a DMZ with
all ports opened.
1. Assign a static IP address to your PC, for example
192.168.1.100.
2. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
3. Go to Advanced > NAT Forwarding > DMZ and select the
checkbox to enable DMZ.
4. Enter the IP address 192.168.1.100 in the DMZ Host IP
Address filed.
5. Click Save to save the settings.
The configuration is completed. You’ve set your PC to a DMZ
host and now you can make a team to game with other players.
12. 5. Make Xbox Online Games Run Smoothly by
UPnP
UPnP (Universal Plug and Play) protocol allows the applications or host devices
to automatically find the front-end NAT device and send request to it to open the
corresponding ports. With UPnP enabled, the applications or host devices in the
both sides of NAT device can freely communicate with each other realizing the
seamless connection of the network. You may need to enable the UPnP if you want
I want to:
How can I
do that?
Done!
85
Chapter 12
NAT Forwarding
to use applications for multiplayer gaming, peer-to-peer connections, real-time
communication (such as VoIP or telephone conference) or remote assistance, etc.
Tips:
1. UPnP is enabled by default in this modem router.
2. Only the application supporting UPnP protocol can use this feature.
3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating
system need to install the UPnP components).
For example, When you connect your Xbox to the modem router which has connected
to the internet to play online games, UPnP will send request to the modem router to
open the corresponding ports allowing the following data penetrating the NAT to
transmit. Therefore, you can play Xbox online games without a hitch.
Modem RouterXbox
LAN
WAN
If necessary, you can follow the steps to change the status of UPnP.
1. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router;
2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your
needs.
Chapter 13
VPN Server
The VPN (Virtual Private Networking) Server allows you to access your home network in
a secured way through internet when you are out of home. The router offers three ways
to setup VPN connection: OpenVPN, PPTP (Point to Point Tunneling Protocol) VPN and
IPSec (Internet Protocol Security) VPN.
OpenVPN is somewhat complex but with greater security and more stable. It is suitable
for restricted environment, such as campus network and company intranet.
PPTP VPN is more easily used and its speed is faster, it’s compatible with most operating
systems and also supports mobile devices. Its security is poor and your packets may
be cracked easily, and PPTP VPN connection may be prevented by some ISP.
IPSec (IP Security) is a set of services and protocols defined by IETF (Internet Engineering
Task Force) to provide high security for IP packets and prevent attacks.
This chapter contains the following sections, please choose the appropriate VPN server
connection type according to your needs.
Use OpenVPN to Access Your Home Network
Use PPTP VPN to Access Your Home Network
Use IPSec VPN to Access Your Home Network
87
Chapter 13
VPN Server
13. 1. Use OpenVPN to Access Your Home Network
In the OpenVPN connection, the home network can act as a server, and the remote
device can access the server through the router which acts as an OpenVPN Server
gateway. To use the VPN feature, you should enable OpenVPN Server on your router,
install and run VPN client software on the remote device. Please follow the steps below
to set up an OpenVPN connection.
Step1. Set up OpenVPN Server on Your Router
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > VPN > OpenVPN, and select Enable VPN Server.
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for routers WAN port and synchronize your System Time with internet.
The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the
VPN Server.
3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP.
4. Enter a VPN Service Port to which a VPN device connects, and the port number
should be between 1024 and 65535.
5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased
to the device by the OpenVPN server.
6. Select your Client Access type. Select Home Network Only if you only want the
remote device to access your home network; select Internet and Home Network if
you also want the remote device to access internet through the VPN Server.
88
Chapter 13
VPN Server
7. Click Save.
8. Click Generate to get a new certificate.
Note:
If you have already generated one, please skip this step, or click Generate to update the certificate.
9. Click Export to save the OpenVPN configuration file which will be used by the remote
device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
1. Visit http://openvpn.net/index.php/download/community-downloads.html to
download the OpenVPN software, and install it on your device where you want to run
the OpenVPN client utility.
Note:
You need to install the OpenVPN client utility on each device that you plan to apply the VPN function to access your
router. Mobile devices should download a third-party app from Google Play or Apple App Store.
2. After the installation, copy the file exported from your router to the OpenVPN client
utility’s “config” folder (for example, C:\Program Files\OpenVPN\config on Windows).
The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
13. 2. Use PPTP VPN to Access Your Home Network
PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN
feature, you should enable PPTP VPN Server on your router, and configure the PPTP
connection on the remote device. Please follow the steps below to set up a PPTP VPN
connection.
Step 1. Set up PPTP VPN Server on Your Router
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to Advanced > VPN > PPTP VPN, and select Enable VPN Server.
89
Chapter 13
VPN Server
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router’s WAN port and synchronize your System Time with internet.
3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be
leased to the devices by the PPTP VPN server.
4. Enter the Username and Password to authenticate clients to the PPTP VPN server.
5. Click Save.
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the Windows built-in PPTP software
as an example.
1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Select Set up a new connection or network.
3. Select Connect to a workplace and click Next.
90
Chapter 13
VPN Server
4. Select Use my Internet connection (VPN).
5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet
address field. Click Next.
91
Chapter 13
VPN Server
6. Enter the Username and Password you have set for the PPTP VPN server on your
router, and click Connect.
7. The PPTP VPN connection is created and ready to use.
92
Chapter 13
VPN Server
13. 3. Use IPSec VPN to Access Your Home Network
IPSec VPN is used to create a VPN connection between local and remote networks.
To use IPSec VPN, you should check that both local and remote routers support IPSec
VPN feature. Then, follow the steps below to set up an IPSec VPN connection.
1. The typical VPN topology is here. Site A refers to local network, and Site B refers to
the remote network that is to be connected. Record Site A and Site B’s LAN and WAN
IP addresses before you start configuration.
Modem router 1
LAN: 192.168.1.1
WAN: 219.134.112.246
PC 1
Subnetmask: 255.255.255.0
WAN: 219.134.112.247
Modem Router 2
PC 2
LAN: 192.168.2.1
Subnetmask: 255.255.255.0
Site A
Site B
2. Visit http://tplinkmodem.net, and log in with the account you set for the router.
3. Go to Advanced > VPN > IPSec VPN, and click Add.
93
Chapter 13
VPN Server
4. In the IPSec Connection Name column, specify a name.
5. In the Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address.
6. Configure Site A’s LAN.
In the Tunnel access from local IP addresses column, we take Subnet Address as an
example. Input the LAN IP range of Site A in the IP Address for VPN column, and input
Subnet Mask of Site A.
7. Configure Site B’s LAN.
In the Tunnel access from local IP addresses column, we take Subnet Address as an
example. Input the LAN IP range of Site B in the IP Address for VPN column, and input
Subnet Mask of Site B.
8. Select the Key Exchange Method for the policy. We select Auto(IKE) here.
94
Chapter 13
VPN Server
9. Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy
enabled.
Note: Make sure Site A and Site B use the same key.
10. Leave the Advanced Settings as default value. Then click OK to save.
11. Configuration on Site B (remote network). Refer to step 2 configuration on Site A
and make sure that Site A and Site B use the same pre-shared keys and Perfect
Forward Secrecy settings.
12. The Status column will change to UP if the VPN connection has been set up
successfully.
13. Check the VPN connection. You can ping site B’ LAN IP from your computer in site
A to verify that the IPSec VPN connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
1. On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input cmd and hit OK.
2. In the CLI window, type in “ping 192.168.2.x” (“192.168.2.x can be IP address of any host in Site B). Then press [Enter].
3. If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection is working properly now.
14. Now IPSec VPN is implemented to establish a connection.
Note:
1. The product supports a maximum of ten simultaneous connections.
2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to click Disable
and then click Enable after Site A back on line in order to re-establish the IPSec tunnel.
Chapter 14
Specify Your Network
Settings
This chapter introduces how to change the default settings or adjust the basic
configuration of the modem router using the web management page.
It contains the following sections:
LAN Settings
IPv6 LAN Settings
Wireless Settings
Set Up a Dynamic DNS Service Account
Interface Grouping
Create Static Routes
Set Up the IPv6 Tunnel
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK Archer VR2800v at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK Archer VR2800v in the language / languages: English as an attachment in your email.

The manual is 15,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK Archer VR2800v

TP-LINK Archer VR2800v Quick start guide - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info